Joe,
You need the Tech Repair CD:
ZENITH\9-1047\Power Up Dead\\\\Plug 3ag Pin3*3-16v*Pin5*5vp-P Or
4.3ac*Acrossrx3407*130v If Any Volt
Missing Then Defective HV Brd*9-1047-01;If Ok Pin6-3ag Should Be 3v If\Missing*Bad
9-1055*If Ok Pin1 3ag
Should Be 16v If Not*Bad 9-1047-01\\\\\\\
If your set uses this regulator:
ZENITH\9-1043\DEAD AFTER POWER SURGE* RX3434 BURNT* RX3433 OVER HEATED\\\\REPLACE
STR53041* RX3434*
RX3433* C3432\\\\\\\\
You also could simply have a bad relay...any DC voltages on it?
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Joe Dickerson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 30, 2004 11:50 PM
Subject: [Techs] Zenith ZB32945...9-1047-1 main (92 model)
Set looks very cool, except it won't come on. I have no print
(familiar?), so the going is rocky to say the least. All fuses check
good, as well as the H.O.T. and all diodes as far as I can tell around
the flyback and power supply areas. The relay doesn't even "click" when
power is pressed. I can't find any burned areas around the pc board, so
I decided to call the "cavalry". Any ideas are exceedingly grateful at
this time.
Thanks
Joe
--
Joe Dickerson
Joe's TV & Appliance
Rt 1 Box 3781
Jasper, Texas 75951
(409) 384-3325
use same no. for fax
_______________________________________________
Tech Repair CD...order your just $49.00 plus shipping...One year of updates free.
www.intrepid-video.com www.tech-repair.net
Techs mailing list
[EMAIL PROTECTED]
http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
_______________________________________________
Tech Repair CD...order your just $49.00 plus shipping...One year of updates free.
www.intrepid-video.com www.tech-repair.net
Techs mailing list
[EMAIL PROTECTED]
http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
