Possibly you could remove the original damper diode and try it with your replacement?
IMHO I would call either NESCO or B&D & get the correct one Frank Dr. Digital ----- Original Message ----- From: "Intrepid Video Support" <[EMAIL PROTECTED]> To: "Tech List" <[EMAIL PROTECTED]> Sent: Monday, May 17, 2004 7:54 AM Subject: [Techs] TA Sony KV27TX40 (SCCC70B) > Set came in with shorted STR3035, open Resistors (220-20W) and shorted HOT(2SD1941). > I had to use generic from Cumberland Electronics for the STR3035. > I couldn't find 2 220-20w resistors, so I used a 180 and 270(gives me about 100 ohms) and can't find the > HOT , so I used 2SD2580CA from Prelco. > Set runs now, but on bright scenes the picture pulls in from the right. > Could this be due to my HOT replacement? The one I used has a damper, the original does not. > Or, perhaps I have another problem? I checked for bad connections on main board, as I do with any set this > age. > Any ideas? > Thank you. > > Jeff > -- > Intrepid Video TV/VCR Repair > 263 S Front St, Steelton PA 17113 > 717-939-7708; (F) 717-564-4952 > www.intrepid-video.com www.tech-repair.net > > > _______________________________________________ > Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. > www.intrepid-video.com www.tech-repair.net > Techs mailing list > [EMAIL PROTECTED] > http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.687 / Virus Database: 448 - Release Date: 5/16/04 _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
