Walter, I believe this is similar to the ATC221..which I've seen a few of, though never that error message.. I would get a red screen after doing sensor calibration... If your horizontal or vertical size is too far off, the sensors won't be able to detect. If the convergence is too far off, same thing. Did you go into the service menu and do a sensor calibration?
Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "walter wood" <[EMAIL PROTECTED]> To: "Techs" <[EMAIL PROTECTED]> Sent: Wednesday, August 18, 2004 11:37 AM Subject: [Techs] RCA CTC 211, model D61130. Auto convergence problem > This set has auto convergence, and when I try to > run it, I get an error message about a sensor not > responding. > I've dimmed the room light, and still no go. > Is there an easy way to test the sensors?? > Should they read a resistance? > Should it change with a light shining on the > sensor? > Should I be able to read continuity on the plug > that plugs into the convergence from the sensors, > with it off the board? > This is the same system that they started with > the > CTC195, but the first time I've seen a > malfunction. > TIA > Walter ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:[EMAIL PROTECTED] _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
