Walter, I found two tips that mentioned only replacing that diode fixed it. Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "walter wood" <[EMAIL PROTECTED]> To: "ELECTRONICS PROFESSIONALS LIST" <[EMAIL PROTECTED]> Sent: Thursday, August 19, 2004 11:12 AM Subject: Re: [Techs] RCA CTC 211, model D61130. Auto convergence problem
I haven't seen an ITC222. This set is like the MMC101/102, and theDTV 306/307. Also very similar to the CTC195 on the convergence board side. Main chassis is totally different. This is the set that the customer claims lightning. But, all I found was CR14110, which is a very common failure. It supplies the voltage to the cooling fans, and if the fans won't start, neither will the set. Convergence is only slightly off but auto focus won't run. Walter --- Joe Tech2004 <[EMAIL PROTECTED]> wrote: > Walter, > If your unit is anything like the RCA PTV D52W19 > ITC222 i just completed > not to long ago, I made the mistake of removing > the front screen from > the back bezel which i didn't have to, but this > was the 1st time i saw > this unit, anyway theres a small 2 or 3 prong > plug that comes off the > bottom center of front screen and it plugs into > another plug harness > coming up from the main chassis, make sure thats > plugged together. When > i used the auto converge i fell in love, 1st time > seeing it and it > worked perfecto...!!! GL HTH "joe" > ================================= > [EMAIL PROTECTED] From: > [EMAIL PROTECTED](walter wood) Date: Wed, Aug > 18, 2004, 8:37am > (EDT-3) To: [EMAIL PROTECTED] (Techs) > Subject: [Techs] RCA CTC > 211, model D61130. Auto convergence problem > Reply to: > [EMAIL PROTECTED] (ELECTRONICS > PROFESSIONALS LIST) > > This set has auto convergence, and when I try to > run it, I get an error > message about a sensor not responding. > I've dimmed the room light, and still no go. Is > there an easy way to > test the sensors?? Should they read a resistance? > > Should it change with a light shining on the > sensor? > Should I be able to read continuity on the plug > that plugs into the > convergence from the sensors, with it off the > board? > This is the same system that they started with > the > CTC195, but the first time I've seen a > malfunction. > TIA > Walter > ===== > Walter Wood > Future Tech Home Center > 2786 Hwy. 43 N. > Lawrenceburg Tn. 38464 > 931-829-3337 > Fax 931-829-4044 > mailto:[EMAIL PROTECTED] > ______________________________________________ > Tech Repair CD...order your just $49.00 plus > shipping...One year of > updates free. www.intrepid-video.com > www.tech-repair.net > Techs mailing list > [EMAIL PROTECTED] > http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com > > Joes....Electronics > (Joe:Tech/2004) > [EMAIL PROTECTED] > Fax::509-479-2283 > > > _______________________________________________ > Tech Repair CD...order your just $49.00 plus > shipping...One year of updates free. > www.intrepid-video.com www.tech-repair.net > Techs mailing list > [EMAIL PROTECTED] > http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com > ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:[EMAIL PROTECTED] _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
