I don’t see a problem with this…it should work fine…because you are treating it like an omni…only risk is signal loss because of splitters and extra connectors. I would make sure hat the cables are all identical lengths.
Cheers, ______________________________ Andreas Wiatowski | CEO Silo Wireless Inc. Email [email protected] 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 From: [email protected] [mailto:[email protected]] On Behalf Of Adam Moffett Sent: Friday, June 17, 2016 12:01 PM To: [email protected] Subject: [Telrad] splitters We know we can put two sector antennas back to back. What if we had 4 90 degree sectors in an array and used a set of hybrid splitter/combiners to connect all 4 antennas to one compact? Omni coverage without farting around with omnis. To expand capacity you remove splitters and put in a second BTS. You would lose 3db from splitting, and probably another db to insertion loss and extra cable, but you can make that up on the Tx side by turning up the Tx power. You'd be a little weaker on the Rx at the BTS and you couldn't fix that, but download is more important than upload so maybe I don't have to care. Is this a bad idea for any other reasons?
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
