Paul, We are using the 3000 in band 40 in a 10Mhz channel with filters because it is the WCS band adjacent to Sirius XM.
We see about 34Mbps x 3-6Mbps UL. If you are in an area with anyone within 50Miles of your band, you really want to know what they are running and make sure that you are timed via SA and SFF. I would recommend serious down tilt. We have gone to 5-7deg with tremendous performance increases on the uplink. We were at 3-4deg and had a hard time getting 4Mbps on uplink, since changing a few sites to more aggressive tilt...we have seen a serious improvement in uplink. 2Ghz...carries far!. We are running SA1 SSF1. Please keep in mind we have only 2 10Mhz channels and are running 4 sectros back to back with approximately 10KM between tower sites... so more small cell than Macro. I just finished picking up another Anritsu BTS Master with FDD LTE options and I'm going to add the TDD LTE options to it. It will give me OTA (Over the air) demodulation showing RB usage, EVM (error vector magnitude) measurements, constellation diagrams and a read of all OTA PCI ID's from a tower and adjacent with dominance statistics. I can get my hands on another 1 or 2 instruments for around 4K. I'm not sure how much adding the TDD options will be, but I know it will be well worth it. We also purchased a Sunsight AAT for Azimuth and tilt. We are working on a deadly accurate RNP moving forward. Already on 2 of the towers, the azimuths were out by a 10-15 deg magnitude and tilt was not 100%. We are hoping with these tweaks we will be able to take our LTE network to the next level of quality. Cheers, ______________________________ Andreas Wiatowski | CEO Silo Wireless Inc. Email [email protected] 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul Vaughn Sent: Saturday, September 17, 2016 2:33 PM To: [email protected] Subject: [Telrad] Compact 3000 4X4 Patch Anyone have a status on the following? "Note 4x4 on the Compact 3000 is not supported in this build but coming within a few weeks. So only the Compact 1000 for now, Thanks Nick" - This was 7/29/2016. I finally stayed up through the night to get everything updated to the 6.6 only to find out by reading the fine print afterwards that 4X4 was not supported yet. Long frustrating night. And no help for the clients who are suffering poor uploads. We are running the 3000 on 15 mhz band 41. Has anyone found upload to be an issue? It seems like I don't have any clients running more that a few hundred k upload. Occasionaly I find one that will pull 2 megs. I'd be interested to know what others are doing and if there is something we can do differently. If I recall when we set this up we set it at 75/25 for the split. I'm looking up info now on playing with that setting a little. But honestly with only 15 mhz to play with we don't have a lot of download to give up. Anyone else running this way, or have thoughts or comments on the setup? Thanks - Paul Paul R. Vaughn Tennessee Wireless (931) 996-2050 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, September 16, 2016 11:00 AM To: [email protected] Subject: Telrad Digest, Vol 23, Issue 18 Send Telrad mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://lists.wispa.org/mailman/listinfo/telrad or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of Telrad digest..." Today's Topics: 1. CPE 8000 (Brian Meredith) 2. Re: CPE 8000 (Matthew Carpenter) ---------------------------------------------------------------------- Message: 1 Date: Thu, 15 Sep 2016 16:57:27 -0700 From: Brian Meredith <[email protected]> Subject: [Telrad] CPE 8000 To: [email protected] Message-ID: <calsaqdcr48h1vtzyjb3hzypzhvek+jnm1oots2jubjwej7j...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" Anyone have (or know a vendor which has) a few (4) CPE 8000 in stock that we can get relatively quickly? Thanks ---------- Brian Meredith Chief Technology Officer / Network Administrator Softcom Internet Communications, Inc. (209) 744-4234 | [email protected] -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.wispa.org/mailman/private/telrad/attachments/20160915/a7c58275/attachment-0001.html ------------------------------ Message: 2 Date: Fri, 16 Sep 2016 00:27:58 +0000 From: Matthew Carpenter <[email protected]> Subject: Re: [Telrad] CPE 8000 To: [email protected] Message-ID: <CAEBu8BhKXKXCA+MZJ1CKBG0v=pKARbrWBS7O-3y57+D08=q...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" Check SWG they had some last time I checked. Matt Carpenter On Thu, Sep 15, 2016 at 6:57 PM Brian Meredith < [email protected]> wrote: > Anyone have (or know a vendor which has) a few (4) CPE 8000 in stock > that we can get relatively quickly? > > Thanks > > ---------- > > Brian Meredith > > Chief Technology Officer / Network Administrator > > Softcom Internet Communications, Inc. > > (209) 744-4234 | [email protected] > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.wispa.org/mailman/private/telrad/attachments/20160916/447d8c6d/attachment-0001.html ------------------------------ _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad End of Telrad Digest, Vol 23, Issue 18 ************************************** _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
