Ya I have 64 turned off on all of them.
I thought maybe one of the UE's, which was about Mid Span between the
two sectors, was jumping somehow which is why I was looking to Freq lock
it but that's not it.
A couple nights ago I reset the eNB to factory and configured to
SplitMode2x2 using the Frequency of RAN 2&3 (the problem side) and both
problem UE's connected, but I know from prior experience that config is
not stable with UE's in the space between the sectors.
So I then set it back to SplitModef1f2 and those two could not connect.
Both of the UE die at this point:
log:17819:2016-10-29,15:27:27.510001:NOTICE:0:06.06.00729:SGWC:1273:S-GW-U
IP Address being sent to MME in CS Res : 4.0.0.10
log:17820:2016-10-29,15:27:27.510198:NOTICE:0:06.06.00729:SGWC:1273:UE
00100100005xxxx Sending Create session Response from SGW to MME
log:17821:2016-10-29,15:27:27.511157:NOTICE:0:06.06.00729:MME:1230:Sending
Attach Accept for ueId(196) - IMSI 00100100005xxxx, M-TMSI 8177
log:17822:2016-10-29,15:27:37.436624:NOTICE:0:06.06.00729:MME:1230:MME:
Recv UE_Ctxt RelReq from eNodeB 0110016b00 with IP 10.221.36.2 with
cause 21 for UE(196) - trigger Detach
versus the same UE working on the other Sector same eNB same UE location.
log:17295:2016-10-29,15:20:38.810173:NOTICE:0:06.06.00729:SGWC:1273:S-GW-U
IP Address being sent to MME in CS Res : 4.0.0.10
log:17296:2016-10-29,15:20:38.810357:NOTICE:0:06.06.00729:SGWC:1273:UE
00100100005xxxx Sending Create session Response from SGW to MME
log:17297:2016-10-29,15:20:38.811255:NOTICE:0:06.06.00729:MME:1230:Sending
Attach Accept for ueId(181) - IMSI 00100100005xxxx, M-TMSI 8162
log:17298:2016-10-29,15:20:39.127163:NOTICE:0:06.06.00729:MME:1230:Sending
Modify Bearer Request to S-GW for UE-Id(181) - IMSI 00100100005xxxx with
Seq No 8000
log:17299:2016-10-29,15:20:39.127938:NOTICE:0:06.06.00729:SGWC:1273:S-GW-C
UE 00100100005xxxx: Incoming Modify Bearer Request.
log:17300:2016-10-29,15:20:39.128147:NOTICE:0:06.06.00729:SGWC:1273:UE
00100100005xxxx: Modify Bearer Req to PGW Sequence No : 8000
log:17301:2016-10-29,15:20:39.128221:NOTICE:0:06.06.00729:SGWC:1273:
log: UE 00100100005xxxx: Sending Modify Bearer Request from S-GW ==> P-GW
log:17302:2016-10-29,15:20:39.128368:NOTICE:0:06.06.00729:SGWC:1273:UE
001001000 05xxxx:Sending Modify Bearer Response to MME
I occasionally see this in the log
log:17380:2016-10-29,15:21:36.96551:ERROR:0:06.06.00729:MME:1230:Found
Hung UeCbwith IMSI - deleted - for IMSI 00100100005xxxx
and/or this
log:17436:2016-10-29,15:24:41.842574:ERROR:0:06.06.00729:MME:1230:Error:
Could Not Find the TunCB(395)
Is the EPC FUBAR' d? Maybe ?
Thanks Ian
On 29/10/2016 6:30 PM, Jeremy Austin wrote:
On Sat, Oct 29, 2016 at 2:20 PM, goZoom SysAdmin <[email protected]
<mailto:[email protected]>> wrote:
Has anyone seen an 8K not be able to authenticate on one side of a
SplitModef1f2 but it's fine on the other side ?
I haven't seen this, but also not running split mode FWIW.
Still haven't gotten 8Ks to work in QAM64 uplink.
--
Jeremy Austin
(907) 895-2311
(907) 803-5422
[email protected] <mailto:[email protected]>
Heritage NetWorks
Whitestone Power & Communications
Vertical Broadband, LLC
Schedule a meeting: http://doodle.com/jermudgeon
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
--
Ian Fraser
goZoom.ca Inc.
195 Libby's Rd. McNab-Braeside
K7S0E1
877(613) 622 0093 ext 21
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
