Haha, my ticket included the same (?) 2 issues (radio name gets reset after reboot, and TR-069 issues; specifically, TR-069 creq port is passed through instead of intercepted when DMZ enabled). Also, yes, iperf needs some work.
Our first CPE8K install resulted in one of the best observed SINRs on the network. We did a double-take when we saw it. RF performance really does seem to be notably improved. Unfortuantely, we don't get CINR (though both should be pretty close to each other), and we only see the 2 chains SINRs combined into one value, which isn't optimal. -- Nathan From: [email protected] [mailto:[email protected]] On Behalf Of Matthew Carpenter Sent: Tuesday, November 08, 2016 10:01 PM To: Telrad List Subject: Re: [Telrad] CPE8000 impressions? We have 13 of the CPE8000's deployed. Working great! Have a ticket in also for some TR-069 issues, and the Radio name not surviving a reboot. I do know that one of my installers that has been using at CPE7000 with only a 13-14CINR now get a 19-20SINR and says its MUCH better! At first I thought he was not doing a good job aligning the CPE7000, but this is not the first case of better CINR. In my testing I saw around a 2 CINR better (radio/hand out the truck method of testing), but now that we have swapped out a few CPE7000's the numbers a much better then 2 CINR. iPerf testing need to be fixed (ticket in for that). I believe there is a new Firmware version that fixes many of these issues that about ready to come out. Matt Carpenter Amarillo Wireless On Fri, Nov 4, 2016 at 11:40 PM, Bryce Duchcherer <[email protected]<mailto:[email protected]>> wrote: We have a couple deployed, I am looking forward to future software revisions. I like the UI way better than the 7000 and it is allot more responsive and has more detail. We don't have enough deployed to tell performance yet. -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Nathan Anderson Sent: Friday, November 4, 2016 8:54 PM To: [email protected]<mailto:[email protected]> Subject: [Telrad] CPE8000 impressions? Of those that have gotten some and have tried them out, what are your impressions so far? I just opened a ticket outlining some firmware problems we have run into (mostly management related stuff), but other than that my impression at this point is pretty darn positive. RF performance seems to be on point so far, and I'm really digging the web interface on this thing: it is so much more "lightweight", more responsive, and less visually busy. How have others faired? -- Nathan _______________________________________________ Telrad mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/telrad -- Matthew Carpenter 806-316-5071 office 806-236-9558 cell [https://docs.google.com/uc?export=download&id=0BxDRq5UV7HPOaEM4LXVaVnk5cWM&revid=0BxDRq5UV7HPOTDdiVjM0TXRIc3ZzMXVUVDdDVjBiaFU0bHJNPQ]
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
