I would assume at some point the 7000 is going to go away. I haven't
heard of a time line. I suspect the product has a bit of life in it
because of the continued existence of the WiMax install base.
So the 7000 is an option and one I'm looking at though I also suspect
that further development is going to be on the 8000 and not so much on
the 7000 as it was designed out of the gate as a transitional product.
I am contacting a distro for the Baicells guys, they are going to get
back to me and I called the BEC group (thanks Henry C.)
From my conversation with the BEC guys. They are oriented towards a
custom design / support solution. He even mentioned making custom
firmware changes 10 times in 3 months to accommodate a customer. They
are going to get back to me on cost and availability. I will let you
all know what I find out.
Anthony Will
Broadband Corp
Office 952-215-3812
On 1/20/2017 3:38 PM, Nathan Anderson wrote:
I'm not sure what band you are deployed in, but there don't seem to be
that many band 43 (3.6) CPE options at this point...
They aren't discontinuing the 7000 are they? Couldn't you just
continue to buy those?
I haven't played with a Baicells CPE, but could that be an option?
The only other third-party vendor I have run into with FCC approval is
Greenpacket. But they apparently have no U.S. distributor. So you
have to buy directly from Greenpacket in wholesale quantities. They
don't have high-gain options and I don't know that they have any
connectorized models either. And it may be moot anyway because never
having played with one, I do not know their stance on SNMP.
-- Nathan
*From:*[email protected] [mailto:[email protected]] *On
Behalf Of *Anthony Will
*Sent:* Friday, January 20, 2017 11:23 AM
*To:* [email protected]
*Subject:* Re: [Telrad] CPE 8000 - SNMP
My eye's are wide open to the fact that we will likely have to
maintain the breezeview "tax". But breezeview is not integrated with
our billing and network management system or processes and likely
never will be. It's this weird and clunky little thing that I only
touch when adding new SIM's to the network.
Again, SNMP is a requirement for operations in our network. So we are
going to move forward with a solution that is compatible with our
network. If that is Telrad or another solution. Telrad had this
functionality, and was one of many reasons we implemented their
solution. Honestly it is hard for me to call any device that does not
have basic functionality like SNMP a "carrier grade" solution.
So has anyone ran into a CPE device that does support SNMP?
Anthony Will
Broadband Corp
Office 952-215-3812
On 1/20/2017 12:07 PM, David Peterson wrote:
Keep in mind that Breezeview will be a necessary component for CBRS
compliance.
David
-----Original Message-----
From:[email protected] <mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Anthony Will
Sent: Friday, January 20, 2017 1:08 PM
To:[email protected] <mailto:[email protected]>
Subject: Re: [Telrad] CPE 8000 - SNMP
We don't use breezeview for anything as it is noting but a glorified Ihss
import utility at this point. SNMP is a requirement for us. We are looking
for alternative CPE options that support SNMP. Has anyone found one other then
the 7000 series?
Anthony Will
Broadband Corp
Office 952-215-3812
On 1/19/2017 11:52 AM, Terry Duchcherer wrote:
That is the same thing we have been told, maybe if enough of us request
SNMP they will reconsider this.
We have spent months trying to get StarACS to get decent KPI's from the
CPE7000's. Now we are being told that the ACS function is moving to BreezeView,
but KPI's are several months away.
So, now we are changing the CPE7000 to both TR069 and SNMP. Using the
ACS to do bulk software upgrades, parameter changes, etc. And using SNMP to get
the KPI's we want. This has been much more reliable and we are finally getting
the info we need.
Therefore, TELRAD please add SNMP to the CPE8000, and give us the
option of TR069 and/or SNMP just like the CPE7000.
Terry D. Duchcherer
NETAGO
-----Original Message-----
From:[email protected] <mailto:[email protected]>
[mailto:[email protected]] On
Behalf Of David Peterson
Sent: Wednesday, January 18, 2017 10:09 AM
To:[email protected] <mailto:[email protected]>
Subject: Re: [Telrad] CPE 8000 - SNMP
There is no roadmap to add SNMP support to the 8000 that I have heard,
just TR-069
David
-----Original Message-----
From:[email protected] <mailto:[email protected]>
[mailto:[email protected]] On
Behalf Of Anthony Will
Sent: Wednesday, January 18, 2017 12:08 PM
To:[email protected] <mailto:[email protected]>
Subject: [Telrad] CPE 8000 - SNMP
Anyone heard of or requested SNMP support for the 8000?
_______________________________________________
Telrad mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
