I have deployed over 500 7000's and over 100 8000's and have never experienced any failures. All of the upgrades have been over the air.
On Wed, Feb 8, 2017 at 7:14 AM, Shayne Lebrun <[email protected]> wrote: > Does anybody else experience a ten to fifteen percent failure rate when > upgrading UEs? The behavior is, you upgrade the firmware, reboot, and the > device doesn’t come back. Logging into the UE’s management from LAN, > you’ll see it’s stuck in ‘device init.’ Defaulting the unit and rebooting > allows it to boot and attach. > > > > We’re not using the residential gateway device or anything, and the only > config we put in is device name, SNMP and ACS settings. Sometimes we > hardcode the client’s device in the DHCP server, to turn on DMZ to allow > port forwarding, but that doesn’t seem to be a causal factor. > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > > -- Sincerely, Justin Davis SkyWerx COO 970-731-9790
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
