Having been where you are (almost) I thank my lucky stars I bit the bullet and put in redundant EPC setup.
We have had at least a half dozen 'fatal' epc failures, most only require a cold-boot, but three have required remote intervention. Without a spare epc (and I have cold spare on the shelf) we would have been UTCWAP. YMMV, JP On Thu, 2 Mar 2017 10:40:08 -0500, Hanson wrote > Hi Guys, > > A botched firmware update through breezeview has left our epc > without networking. Telrad Support seems to want to RMA it. > > Console support works fine for root access. > > I was just wondering, support doesn't seem to know how to tftp > upload a firmware through the serial port, like you can for a router > or switch.... > > Does anyone have any information on how to reformat the epc, and > upload fresh firmware (with a ground zero config)? > > Having a day without our EPC is unacceptable, and it seems like a > reformat would be the way to go to bring it back fast. (If it's > possible) > > Thanks! > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > > -- > This message has been scanned by E.F.A. Project and is believed to > be clean. Joe Portman Alamo Broadband Inc. www.alamobroadband.com _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
