I sent 2 techs out on Friday with 3 x 8K's, all of them with 983 and they got stuck at the morning job with this problem. They claim that they saw signal around 104/102 ans SINR at 21/21 on the screen when they first set up and they could get Net so decided to go ahead with the install... then an hour later they have the tripod up and wire run and they plug it in and nothing (my gawd I still remember and dread that feeling from our Moto 900 days - "um ya so we drilled holes in your house and stuck this thing on your roof but you ain't got no net so umm.... " <:-( ).
They tried the other 2 @ 8K's and no joy. They've been doing installs for me for about 12 years combined so I don't doubt what they say they saw. The current 106/111 is because they couldn't get any info on the next 2 8K's they tried and this is still the third one, so it needs to be aligned better on Monday. I drove out this morning and 'rolled back' the firmware to what it shipped with because I had no idea what else to try, and bingo. I didn't try 826 or 832. I haven't had a chance to try it against any of the other eNB's yet. I run 694 on most of the 8's and knock on wood I (seem to) have fewer problems than I read on the list... Upload sucks since about eNB 6.0 (?) but we know that and I try to manage that with PCQ bursting on MT until Telrad gets that sorted (hopefully soon). Ian On 18/03/2017 4:55 PM, Nathan Anderson wrote: > We have only deployed 983 in limited fashion, but I can't say that we've seen > this. We haven't finished testing, but so far, with the exception of the > web-based iperf feature, it has been pretty solid for us (certainly at least > when it comes to the basics / in the connectivity department). > > So it's attached but doesn't think it's attached? Did you test 826 and 832 > before this? Did either of those ones work for you? > > -- Nathan > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Ian Fraser > Sent: Saturday, March 18, 2017 1:42 PM > To: [email protected] > Subject: [Telrad] Stuck UE's on Build R983 > > Anyone seen this one yet ? > > EPC .00729 > > eNB .04013 > > CPE8K .983 > > UE connects and shows up in the EPC UE-Info list but it is not pingable > and cannot access the Internet. Detach and it reattaches in a timely > manner but the GUI looks like this > http://my.jetscreenshot.com/29292/20170318-fx4t-37kb > > Power cycled it and same thing. Downgraded to 694 and connection > works. Tried another 8K at the same location and had the same results > with each respective version of code. > > Now running 694 it looks like this > http://my.jetscreenshot.com/29292/20170318-rzb5-38kb > > > Ian > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
