A Free-Reprint Article Written by: Daryl Watters Article Title: Mold Testing Methods Surface Samples
See TERMS OF REPRINT to the end of the article. Article Description: Need Florida mold testing information or mold inspector information. Certified Florida based mold assessor and inspection firm serving Broward Dade and Palm Beach County including Miami and Ft Lauderdale. Florida mold testing IAQ testing for commercial and home house mold and indoor air quality problems. Florida mold inspection. Additional Article Information: =============================== 568 Words; formatted to 65 Characters per Line Distribution Date and Time: 2009-10-20 10:00:00 Written By: Daryl Watters Copyright: 2009 Contact Email: mailto:[email protected] For more free-reprint articles by Daryl Watters, please visit: http://www.thephantomwriters.com/recent/author/daryl-watters.html AND http://www.thePhantomWriters.com/recent/author/daryl-watters.html ============================================= Special Notice For Publishers and Webmasters: ============================================= HTML Copy-and-Paste and TEXT Copy-and-Paste Versions Of Article Are Available at: http://thePhantomWriters.com/free_content/db/w/mold-testing-surface-samples.shtml#get_code --------------------------------------------------------------------- Mold Testing Methods Surface Samples Copyright (c) 2009 Daryl Watters An Accredited Mold Inspection Service, Inc. http://www.floridamoldinspectors.us/ When a mold inspector takes bulk, tape, carpet/dust, or swab samples, spore numbers are not compared quantitatively to outdoor levels. Thus, the number of spores in these types of test samples often are not as meaningful as the numbers found in air testing samples. Also, because the air is not being tested, your inspector cannot say for sure how much if any of the mold sampled from surfaces is in the air you are breathing. However, these samples can be helpful because they typically provide the analyst with more than just the mold spores so that identification of mold type can be more accurately conducted by viewing various structures of the mold, not just spores. In addition to providing more structure for direct microscopic examination, bulk samples are sometimes grown in the lab or run through PCR testing for analysis to the species level. Mold Testing with Tape When a tape sample of actual mold from a moldy surface is taken using Biotope, a clear piece of Scotch Tape, or a sticky Cyclex slide, the sample will often show entire mold structures including spore forming structures and hyphea. These can be used to confirm mold growth more confidently and rule out the possibility that the sample was just settled spores only. Mold Testing of Bulk Samples When a bulk sample of actual mold or moldy material is sent to a lab, the lab may use clear Scotch Tape to take a sample from the bulk mold material for examination under the microscope. The lab may culture some of the bulk mold specimen in a Petri dish for analysis of the colonies to the species level. Mold Testing of Carpet Dust When a dust sample is analyzed it may be place on a slide for direct examination to view spores hidden in the dust directly. This is a very common method used by most mold inspectors labs and has become accepted in the industry. This popular method may be helpful but many spores are not seen because spores are hidden behind dust, or the spores blend in well with dust. The lab will often report very low spore levels even if the carpet sampled was obviously very moldy. This inspector has seen this happen many times with various dust samples tested at different labs. When studies are done on what are normal and what are elevated spore levels in carpet dust, the scientist working on the projects and the mold labs they utilize for dust analysis use very different methods for analysis. They wash the dust and dust filter out of the collector with a mild solvent and culture the spores in a petri dish. This method will typically reveal tens of thousands of spores or even hundreds of thousands or millions of spores. Your inspector must be aware of the different methods and the different results to be expected when interpreting dust sample results. Mold Testing with Swabs A sterile swab provided by a microbiology lab is sometimes used for sampling. This inspector dislikes this method because unlike when using tape, the mold structures are always broken up when using swabs. Therefore, meaningful mold structure identification and spore counting cannot be done when testing mold with swabs. Many poorly trained mold inspectors will use a swab on nearly every inspection done, not because of a well thought out sampling plan, but simply because the lab gave them swabs. --------------------------------------------------------------------- Daryl Watters provides mold testing services and mold spore analysis along with building defect diagnosis for home owners in West Palm Beach, Fort Lauderdale, and Miami Fl. For more mold testing and inspection information visit: http://www.floridamoldinspectors.us/florida-mold-testing-air-samples.htm http://www.floridamoldinspectors.us/Typical-Mold-Testing-procedures.htm http://www.floridamoldinspectors.us/South-Florida-Mold-Testing-Kits.htm --- END ARTICLE --- Get HTML or TEXT Copy-and-Paste Versions Of This Article at: http://thePhantomWriters.com/free_content/db/w/mold-testing-surface-samples.shtml#get_code ..................................... TERMS OF REPRINT - Publication Rules (Last Updated: May 11, 2006) Our TERMS OF REPRINT are fully enforcable under the terms of: The Digital Millennium Copyright Act http://thomas.loc.gov/cgi-bin/query/z?c105:H.R.2281.ENR: ..................................... *** Digital Reprint Rights *** * If you publish this article in a website/forum/blog, You Must Set All URL's or Mailto Addresses in the body of the article AND in the Author's Resource Box as Hyperlinks (clickable links). * Links must remain in the form that we published them. Clean links should point to the Author's links without redirects having been inserted into the copy. * You are not allowed to Change or Delete any Words or Links in the Article or Resource Box. Paragraph breaks must be retained with articles. You can change where the paragraph breaks fall, but you cannot eliminate all paragraph breaks as some have chosen to do. * Email Distribution of this article Must be done through Opt-in Email Only. No Unsolicited Commercial Email. * You Are Allowed to format the layout of the article for proper display of the article in your website or in your ezine, so long as you can maintain the author's interests within the article. * You may not use sentences from this article as an input for any software that steals sentences from others in order to build an article with software. The copyright on this article applies to the "WHOLE" article. *** Author Notification *** We ask that you notify the author of publication of his or her work. Daryl Watters can be reached at: [email protected] *** Print Publication Reprint Rights *** If you desire to publish this article in a PRINT publication, you must contact the author directly for Print Permission at: mailto:[email protected] ..................................... If you need help converting this text article for proper hyperlinked placement in your webpage, please use this free tool: http://thephantomwriters.com/link-builder.pl ***************************************************************** * * This email is being delivered directly to members of the group: * * [email protected] * ***************************************************************** ===================================================================== ABOUT THIS ARTICLE SUBMISSION http://thePhantomWriters.com is a paid article distribution service. thePhantomWriters.com and Article-Distribution.com are owned and operated by: Bill Platt 3010 E Raintree Stillwater, Oklahoma USA 74074 Learn more about our article distribution services by visiting: http://thephantomwriters.com/x.pl/tpw/info/article-distribution/index.html The content of this article is solely the property and opinion of its author, Daryl Watters http://www.floridamoldinspectors.us/ --------------------------------------------------------------------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ---------------------------------------------------------------------
