I've noticed that the "scale" option does not appear to work with the "altitude" point symbol. Is there any particular reason for that? - Ben
-----Original Message----- From: therion-bounces at speleo.sk [mailto:[email protected]] On Behalf Of Stacho Mudrak Sent: 07 May 2008 08:09 To: therion at speleo.sk Subject: Re: [Therion] Altitude Either you can use altitude option for a wall point - just enter "altitude ." to the line point options text editor, as Martin has written. This way we prefer. Or you can add -align option to your label - e.g. "-align tl" would probably help in your case (tl means top left). Regards, S. 2008/5/6 Martin Sluka <martinsluka at mac.com>: > > > > On 6.5.2008, at 22:55, Ben Cooper wrote: > > > > > Can anyone advise me on this one? > The simplest way is to add to point of line "wall" the option "altitude ." > You should find in section "Line points" the black rectangle. > Highlight the point of wall you want to add the altitude and write "altitude ." there. > > "altitude <value> . can be speci ed only with the wall type. This > option creates an altitude label on the wall. All altitudes are > exported as a di erence against grid Z origin (which is 0 by default). > If the value is speci ed, it gives the altitude di erence of the point > on the wall relative to the nearest station. The value can be pre xed > by a keyword \fix", then no nearest station is taken into > consideration; the absolute given value is used instead. Units can > follow the value. Examples: +4, [+4 m], [fix 1510 m]." > > > "7 General altitude label. All altitudes are exported as a di erence > against grid Z origin (which is 0 by default). To display altitude on > the passage wall, use altitude option for any line point of the > passage wall." > > M. > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://www.speleo.sk/mailman/listinfo/therion > > _______________________________________________ Therion mailing list Therion at speleo.sk http://www.speleo.sk/mailman/listinfo/therion
