On 11.3.2009, at 18:57, Boldt, Markus wrote: > I have a survey on a level of about 500m given in one scrap. > Another scrap (in the same File) contains a short passage with > about 550m. The two scraps are connected at one station point. But > Therion writes a map so that the higher "level" is below the lower. > What is wrong?
If you define the map you should write scraps in order from top to bottom (if they one above other). And if they are overlaped you should use "break". There are several other ways how to define what is up and what is down - check the conference. m.
