Yep, that would work, but Therion is meant to work with the survex data formats, so the nosurvey should work. It looks a bit like a bug, or I am using wrongly. If no survey is not supported, that is fine, it is not critical.
My solution would be to put a false leg in and not that nearly hit and accept a small gap. This would not case any false distortion but I prefer the idea of nosurvey. Andrew On 10/06/10 21:19, Bruce wrote: >> I have 2 stations connected by sight only so I tried > >> data nosurvey from to >> 2.1 2.9 > > > Andrew > I can only think of somewhat lateral solutions to this. > > 1. Make the measurements between the stations (You seem to be using a distoX > based on the data format), or > > 2. Replace the nodata line with; > station 2.1 "Can see stn 2.9 from here" > and then make your drawings using Xtherion with this in mind, or > > 3. Make a guess at what the measurements are between the points, and do > something like making your survey grade BCRA5 and then; > group > grade BCRA3 > <your guessed measurements here> > endgroup > > If this distorts too much you could use sd to lower the dependence on the > guessed data. Based on my trials a year ago this can be very effective. > > Bruce > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion >
