Hi Torsten, either you use equate, or you need to remove the individual surveys. You can use "#" to mark the lines as comment. Small hint, you can use more than two stations at the equate command.
Regards Wolfgang Am 29.08.2011 16:59, schrieb Torstein Finnesand: > Hi, > "Equate" is used to set the survey stations equivalence, i.e: equate > 2 at first 1 at second. The cave I survey has only unique station names > (about 3000). But still I have to use the equate command for a station > that is located in 2 surveys. If not, the loops will not be closed. So > I do like this: equate TA40 at first TA40 at second. I have to use this > command many times, since the cave has a lot of surveys. > > Question: Is it possible to not use the equate command, since all > stations are unique? For instance by another command that tells > Therion/survex that the station names are unique even if there are two > or more surveys or by arranging data in another way. > > Torstein Finnesand > Norway > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion
