if all stations have different name in Compass and Walls, could they be put in a single survey name-space? However, I agree that this is not the cleanest way as it is not respecting the structure of surveys that was previously defined.
Xavier Le 22/04/2015 13:31, Martin Sluka a écrit : > The problem of Compass and Walls data conversion is generate list of equate > commands. In Compass and Walls it is simple, because there couldnât be two > stations with identical name. But in Therion it is not a rule. So you should > to do it manually. > > in survey12 which is above survey1 and survey2: > > equal a101 at survey1 a101 at survey2 > > m.s. > > >> 19. 4. 2015 v 10:20, Robert Countess <rob.countess at gmail.com>: >> >> <Glory.zip> >> >> This is from the Glory âole caving area on Vancouver Island. I surveyed >> there from 1996 to 2007 in Arch Cave (10.5 km) Glory âole (now 2.8 km) and >> Resonance (now 1.8 km). The area had been previously explored from 1980-1988 >> and some maps produced by hand. Much of the original data was lost. I >> resurveyed a few km in Arch cave and added 5 km but never completed a map >> due to the fact that loop closures were wreaking havoc with my walls and >> Illustrator attempts at a map. The original data in Arch was sketchy solo >> topofil survey. Resonance was extended by about 1km and an map produced but >> recently another half kilometre of passage has been added. Glory âole was >> increased by about a kilometre but the main passage original survey 1.3 km >> needed to be resurveyed which led to no map. There are drafting leads in >> connection areas between the three caves. Two other caves Pellucidar and >> Tsulton Rising (cave dive) were managed by Pat Shaw, a cave diver. >> >> I went off to medical school in 2007 and nobody picked up the torch as far >> as drawing maps. Now Iâm back and we are at it again. I want Therion to >> keep the maps up to date with the exploration going forward. >> >> The data is from 2004. I lost my 2007 copy due to 7 years of neglect and >> hard drive failure. I still have original notes of all exploration I was >> involved in but there are probably 3 km of passage that should be resurveyed. >> >> Iâm getting the hang of Therion and have got Resonance and Glory âole >> centerline data converted over. >> >> >> >> >> On Apr 19, 2015, at 12:54 AM, Martin Sluka <martinsluka at mac.com> wrote: >> >>> Robert, may you send me an example of Walls data? >>> >>> I was surprised how simple is to convert Compass data to Therion. As I may >>> say, Compass data are small subset of Therionâs format so several simple >>> copy/paste made the job. >>> >>> m.s. >>> >>> >>>> 19. 4. 2015 v 6:41, Robert Countess <rob.countess at gmail.com>: >>>> >>>> Thanks for the help. >>>> >>>> Generated my first pdf plan and profile with UTM/elevation and xvi file >>>> for drawing map. I love how automatic many of these things are. I am >>>> feeling hopeful about Therion now. I am stoked to finally finish the maps >>>> of Arch, Resonance, and Glory âole and hopefully later this summer we >>>> will connect them all to make it at least Canadaâs second longest Cave. >>>> If I get this working, Iâm sure I can convince some other Canadian >>>> cavers to use Therion. Then again I canât even get them to use Walls. >>>> Many are still using On Station. I think the speed and flexibility of >>>> output with win them over. >>>> >>>> One tiny annoyance. One of the surveyors last names is von Vorkampff and >>>> Therion gives and âinvalid name formatâ error message. I changed it to >>>> von_Vorkampff and bypassed the error but with sub par final map output - >>>> it says von.Vorkampff >>>> >>>> Again, thanks for helping me out. Iâm sure Iâll have more questions >>>> later. >>>> >>>> Rob Countess >>>> >>>> On Apr 18, 2015, at 2:49 PM, therion-request at speleo.sk wrote: >>>> >>>>> Send Therion mailing list submissions to >>>>> therion at speleo.sk >>>>> >>>>> To subscribe or unsubscribe via the World Wide Web, visit >>>>> http://mailman.speleo.sk/mailman/listinfo/therion >>>>> or, via email, send a message with subject or body 'help' to >>>>> therion-request at speleo.sk >>>>> >>>>> You can reach the person managing the list at >>>>> therion-owner at speleo.sk >>>>> >>>>> When replying, please edit your Subject line so it is more specific >>>>> than "Re: Contents of Therion digest..." >>>>> >>>>> >>>>> Today's Topics: >>>>> >>>>> 1. Re: having trouble, first time user (Wookey) >>>>> 2. Re: Therion Digest, Vol 112, Issue 4, having trouble, first >>>>> time user (Robert Countess) (Dave Clucas) >>>>> >>>>> >>>>> ---------------------------------------------------------------------- >>>>> >>>>> Message: 1 >>>>> Date: Sat, 18 Apr 2015 23:07:26 +0100 >>>>> From: Wookey <wookey at wookware.org> >>>>> Subject: Re: [Therion] having trouble, first time user >>>>> To: therion at speleo.sk >>>>> Message-ID: <20150418220726.GF8982 at halon.org.uk> >>>>> Content-Type: text/plain; charset=utf-8 >>>>> >>>>> +++ Robert Countess [2015-04-18 12:25 -0700]: >>>>>> Im using Mac OSX10.9. followed MacOSX installation instructions on wiki >>>>>> >>>>>> Roberts-MacBook-Pro:~ Rob$ ruby -e "$(curl -fsSL https:// >>>>>> raw.githubusercontent.com/Homebrew/install/master/install)" >>>>> [lots of dependency/package building] >>>>> >>>>>> ? /usr/local/Cellar/therion/5.3.16: 6 files, 4.4M, built in 50 seconds >>>>>> Roberts-MacBook-Pro:~ Rob$ xtherionxtherion >>>>>> -bash: xtherionxtherion: command not found >>>>>> Roberts-MacBook-Pro:~ Rob$ xtherion >>>>> This is exactly the reason that 20 years ago binary linux >>>>> distributions were invented, to replace the previous painful process >>>>> of users downloading code and tools and dependencies and building >>>>> them all until they got some software working. 'brew' attempts to >>>>> automate this process but there are still a lot of ways it can go >>>>> wrong. >>>>> >>>>> Do Mac people not have a proper packaging system someone could make >>>>> therion packages for? >>>>> >>>>>> _____________________________________________________ >>>>>> >>>>>> A program named WISH opened and window named therion compiler. The >>>>>> Status bar >>>>>> at the bottom read ?User interface is not active. To activate it open and >>>>>> existing file or create a new one." >>>>>> When I try to open a file with either the Wish file|open or the folder >>>>>> button >>>>>> I am unable to open any files in the Demo data set - they are all grey >>>>>> and >>>>>> cannot be selected. >>>>>> >>>>>> I am a first time user. Previously used On Station and the Walls. I had >>>>>> data >>>>>> for 3 major caving areas in Walls totalling about 50 km of cave. I want >>>>>> to >>>>>> switch it all to Therion but if I can?t get the program to work then >>>>>> I?ll have >>>>>> to stick with Walls. >>>>> I'm sure we can get you going. We do have several mac users here, but >>>>> I'm not one so can't really provide much help. >>>>> >>>>> Can you get a command prompt? Can you run 'xtherion' from there? >>>>> That's the user interface for drawing stuff up. >>>>> >>>>> 'therion' is the compiler tool that processes the data. What happens >>>>> if you run 'therion -v version'? Does that print out a version? or >>>>> 'therion --print-init-file'? >>>>> >>>>> If you can convert some of your (centreline) data (just using a text >>>>> editor) you should be able process it using just 'therion'. >>>>> >>>>> You will need xtherion in order to draw up cave sections. >>>>> >>>>> Has anyone written a walls to therion conversion tool? I'm not aware of >>>>> one. >>>>> >>>>> Wookey >>>>> -- >>>>> Principal hats: Linaro, Debian, Wookware, ARM >>>>> http://wookware.org/ >>>>> >>>>> >>>>> ------------------------------ >>>>> >>>>> Message: 2 >>>>> Date: Sat, 18 Apr 2015 22:18:41 +0100 >>>>> From: Dave Clucas <dave.clucas at icloud.com> >>>>> Subject: Re: [Therion] Therion Digest, Vol 112, Issue 4, having >>>>> trouble, first time user (Robert Countess) >>>>> To: therion at speleo.sk >>>>> Message-ID: <2A55A0EF-15F8-414A-B2CB-0EA18192A198 at icloud.com> >>>>> Content-Type: text/plain; charset="us-ascii" >>>>> >>>>> To open an existing file start Terminal and type xtherion followed by the >>>>> filename you wish to open. You may drag the filename from a Finder window. >>>>> >>>>> Dave Clucas >>>>> daveclucas.com <http://daveclucas.com/> >>>>> sarawak-caves.com <http://sarawak-caves.com/> >>>>> dave.clucas at icloud.com <mailto:daveclucas at icloud.com> >>>>> >>>>> Exploring the World - One cave at a time >>>>> >>>>> >>>>>> On 18 Apr 2015, at 21:17, therion-request at speleo.sk wrote: >>>>>> >>>>>> Send Therion mailing list submissions to >>>>>> therion at speleo.sk >>>>>> >>>>>> To subscribe or unsubscribe via the World Wide Web, visit >>>>>> http://mailman.speleo.sk/mailman/listinfo/therion >>>>>> or, via email, send a message with subject or body 'help' to >>>>>> therion-request at speleo.sk >>>>>> >>>>>> You can reach the person managing the list at >>>>>> therion-owner at speleo.sk >>>>>> >>>>>> When replying, please edit your Subject line so it is more specific >>>>>> than "Re: Contents of Therion digest..." >>>>>> >>>>>> >>>>>> Today's Topics: >>>>>> >>>>>> 1. having trouble, first time user (Robert Countess) >>>>>> >>>>>> >>>>>> ---------------------------------------------------------------------- >>>>>> >>>>>> Message: 1 >>>>>> Date: Sat, 18 Apr 2015 12:25:37 -0700 >>>>>> From: Robert Countess <rob.countess at gmail.com> >>>>>> Subject: [Therion] having trouble, first time user >>>>>> To: therion at speleo.sk >>>>>> Message-ID: <3EF75C43-2B28-4525-A08F-FBD57383F1AF at gmail.com> >>>>>> Content-Type: text/plain; charset="utf-8" >>>>>> >>>>>> Im using Mac OSX10.9. followed MacOSX installation instructions on wiki >>>>>> >>>>>> Installed Mactex >>>>>> rebooted >>>>>> >>>>>> Last login: Fri Apr 17 12:19:12 on console >>>>>> Roberts-MacBook-Pro:~ Rob$ make >>>>>> xcode-select: note: no developer tools were found at >>>>>> '/Applications/Xcode.app', requesting install. Choose an option in the >>>>>> dialog to download the command line developer tools. >>>>>> Roberts-MacBook-Pro:~ Rob$ >>>>>> [Restored] >>>>>> Last login: Sat Apr 18 09:14:48 on console >>>>>> Roberts-MacBook-Pro:~ Rob$ >>>>>> [Restored] >>>>>> Roberts-MacBook-Pro:~ Rob$ ruby -e "$(curl -fsSL >>>>>> https://raw.githubusercontent.com/Homebrew/install/master/install)" >>>>>> ==> This script will install: >>>>>> /usr/local/bin/brew >>>>>> /usr/local/Library/... >>>>>> /usr/local/share/man/man1/brew.1 >>>>>> ==> The following directories will be made group writable: >>>>>> /usr/local/. >>>>>> /usr/local/bin >>>>>> /usr/local/share >>>>>> /usr/local/share/man >>>>>> /usr/local/share/man/man1 >>>>>> ==> The following directories will have their group set to admin: >>>>>> /usr/local/. >>>>>> /usr/local/bin >>>>>> /usr/local/share >>>>>> /usr/local/share/man >>>>>> /usr/local/share/man/man1 >>>>>> >>>>>> Press RETURN to continue or any other key to abort >>>>>> ==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/. /usr/local/bin >>>>>> /usr/local/share /usr/local/share/man /usr/local/share/man/man1 >>>>>> >>>>>> WARNING: Improper use of the sudo command could lead to data loss >>>>>> or the deletion of important system files. Please double-check your >>>>>> typing when using sudo. Type "man sudo" for more information. >>>>>> >>>>>> To proceed, enter your password, or type Ctrl-C to abort. >>>>>> >>>>>> Password: >>>>>> ==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/. /usr/local/bin >>>>>> /usr/local/share /usr/local/share/man /usr/local/share/man/man1 >>>>>> ==> /usr/bin/sudo /bin/mkdir /Library/Caches/Homebrew >>>>>> ==> /usr/bin/sudo /bin/chmod g+rwx /Library/Caches/Homebrew >>>>>> ==> Downloading and installing Homebrew... >>>>>> remote: Counting objects: 3533, done. >>>>>> remote: Compressing objects: 100% (3387/3387), done. >>>>>> remote: Total 3533 (delta 34), reused 1514 (delta 18), pack-reused 0 >>>>>> Receiving objects: 100% (3533/3533), 2.65 MiB | 1.55 MiB/s, done. >>>>>> Resolving deltas: 100% (34/34), done. >>>>>> From https://github.com/Homebrew/homebrew >>>>>> * [new branch] master -> origin/master >>>>>> HEAD is now at 681c6f3 txt2tags: modernize and add test >>>>>> ==> Installation successful! >>>>>> ==> Next steps >>>>>> Run `brew help` to get started >>>>>> Roberts-MacBook-Pro:~ Rob$ brew help >>>>>> Example usage: >>>>>> brew [info | home | options ] [FORMULA...] >>>>>> brew install FORMULA... >>>>>> brew uninstall FORMULA... >>>>>> brew search [foo] >>>>>> brew list [FORMULA...] >>>>>> brew update >>>>>> brew upgrade [FORMULA...] >>>>>> brew pin/unpin [FORMULA...] >>>>>> >>>>>> Troubleshooting: >>>>>> brew doctor >>>>>> brew install -vd FORMULA >>>>>> brew [--env | config] >>>>>> >>>>>> Brewing: >>>>>> brew create [URL [--no-fetch]] >>>>>> brew edit [FORMULA...] >>>>>> open >>>>>> https://github.com/Homebrew/homebrew/blob/master/share/doc/homebrew/Formula-Cookbook.md >>>>>> >>>>>> Further help: >>>>>> man brew >>>>>> brew home >>>>>> Roberts-MacBook-Pro:~ Rob$ brew update >>>>>> Already up-to-date. >>>>>> Roberts-MacBook-Pro:~ Rob$ brew doctor >>>>>> Please note that these warnings are just used to help the Homebrew >>>>>> maintainers >>>>>> with debugging if you file an issue. If everything you use Homebrew for >>>>>> is >>>>>> working fine: please don't worry and just ignore them. Thanks! >>>>>> >>>>>> Warning: Some directories in /usr/local/share/man aren't writable. >>>>>> This can happen if you "sudo make install" software that isn't managed >>>>>> by Homebrew. If a brew tries to add locale information to one of these >>>>>> directories, then the install will fail during the link step. >>>>>> You should probably `chown` them: >>>>>> >>>>>> /usr/local/share/man/de >>>>>> /usr/local/share/man/de/man1 >>>>>> Roberts-MacBook-Pro:~ Rob$ brew tap homebrew/science >>>>>> ==> Tapping Homebrew/science >>>>>> Cloning into '/usr/local/Library/Taps/homebrew/homebrew-science'... >>>>>> remote: Counting objects: 10005, done. >>>>>> remote: Compressing objects: 100% (15/15), done. >>>>>> remote: Total 10005 (delta 5), reused 0 (delta 0), pack-reused 9990 >>>>>> Receiving objects: 100% (10005/10005), 2.68 MiB | 1.56 MiB/s, done. >>>>>> Resolving deltas: 100% (5584/5584), done. >>>>>> Checking connectivity... done. >>>>>> Tapped 475 formulae (501 files, 5.1M) >>>>>> Roberts-MacBook-Pro:~ Rob$ brew install >>>>>> https://raw.githubusercontent.com/un1x86/homebrew-science/therion/therion.rb >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Installing dependencies for therion: libpng, freetype, xz, libtool, j >>>>>> ==> Installing therion dependency: libpng >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/libpng-1.6.17.mavericks.bot >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring libpng-1.6.17.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/libpng/1.6.17: 17 files, 1.3M >>>>>> ==> Installing therion dependency: freetype >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/freetype-2.5.5.mavericks.bo >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring freetype-2.5.5.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/freetype/2.5.5: 60 files, 2.6M >>>>>> ==> Installing therion dependency: xz >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/xz-5.2.1.mavericks.bottle.t >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring xz-5.2.1.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/xz/5.2.1: 59 files, 1.7M >>>>>> ==> Installing therion dependency: libtool >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/libtool-2.4.6.mavericks.bot >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring libtool-2.4.6.mavericks.bottle.tar.gz >>>>>> ==> Caveats >>>>>> In order to prevent conflicts with Apple's own libtool we have prepended >>>>>> a "g" >>>>>> so, you have instead: glibtool and glibtoolize. >>>>>> ==> Summary >>>>>> ? /usr/local/Cellar/libtool/2.4.6: 69 files, 3.8M >>>>>> ==> Installing therion dependency: jpeg >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/jpeg-8d.mavericks.bottle.2. >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring jpeg-8d.mavericks.bottle.2.tar.gz >>>>>> ? /usr/local/Cellar/jpeg/8d: 18 files, 780K >>>>>> ==> Installing therion dependency: imagemagick >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/imagemagick-6.9.1-1.maveric >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring imagemagick-6.9.1-1.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/imagemagick/6.9.1-1: 1442 files, 22M >>>>>> ==> Installing therion dependency: lcdf-typetools >>>>>> ==> Downloading http://www.lcdf.org/type/lcdf-typetools-2.104.tar.gz >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> ./configure --prefix=/usr/local/Cellar/lcdf-typetools/2.104 >>>>>> --without-kpaths >>>>>> ==> make install >>>>>> ? /usr/local/Cellar/lcdf-typetools/2.104: 29 files, 4.1M, built in 20 >>>>>> seconds >>>>>> ==> Installing therion dependency: cmake >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/cmake-3.2.2.mavericks.bottl >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring cmake-3.2.2.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/cmake/3.2.2: 1847 files, 32M >>>>>> ==> Installing therion dependency: boost >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/boost-1.57.0.mavericks.bott >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring boost-1.57.0.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/boost/1.57.0: 10572 files, 439M >>>>>> ==> Installing therion dependency: fontconfig >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/fontconfig-2.11.1.mavericks >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring fontconfig-2.11.1.mavericks.bottle.3.tar.gz >>>>>> ==> /usr/local/Cellar/fontconfig/2.11.1/bin/fc-cache -frv >>>>>> xtherion? /usr/local/Cellar/fontconfig/2.11.1: 448 files, 3.6M >>>>>> ==> Installing therion dependency: szip >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/szip-2.1.mavericks.bottle.t >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring szip-2.1.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/szip/2.1: 9 files, 136K >>>>>> ==> Installing therion dependency: hdf5 >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles-science/hdf5-1.8.14.maveric >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring hdf5-1.8.14.mavericks.bottle.2.tar.gz >>>>>> ? /usr/local/Cellar/hdf5/1.8.14: 174 files, 11M >>>>>> ==> Installing therion dependency: libtiff >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/libtiff-4.0.3.mavericks.bot >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring libtiff-4.0.3.mavericks.bottle.tar.gz >>>>>> ? /usr/local/Cellar/libtiff/4.0.3: 254 files, 3.8M >>>>>> ==> Installing therion dependency: vtk >>>>>> ==> Downloading http://www.vtk.org/files/release/6.2/VTK-6.2.0.tar.gz >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> cmake -DCMAKE_C_FLAGS_RELEASE= -DCMAKE_CXX_FLAGS_RELEASE= >>>>>> -DCMAKE_INSTALL_PR >>>>>> ==> make >>>>>> xtherion >>>>>> ==> make install >>>>>> ==> Caveats >>>>>> Even without the --with-qt option, you can display native VTK render >>>>>> windows >>>>>> from python. Alternatively, you can integrate the RenderWindowInteractor >>>>>> in PyQt, PySide, Tk or Wx at runtime. Read more: >>>>>> import vtk.qt4; help(vtk.qt4) or import vtk.wx; help(vtk.wx) >>>>>> >>>>>> >>>>>> Python modules have been installed and Homebrew's site-packages is not >>>>>> in your Python sys.path, so you will not be able to import the modules >>>>>> this formula installed. If you plan to develop with these modules, >>>>>> please run: >>>>>> mkdir -p /Users/Rob/Library/Python/2.7/lib/python/site-packages >>>>>> echo 'import site; >>>>>> site.addsitedir("/usr/local/lib/python2.7/site-packages")' >> >>>>>> /Users/Rob/Library/Python/2.7/lib/python/site-packages/homebrew.pth >>>>>> ==> Summary >>>>>> ? /usr/local/Cellar/vtk/6.2.0: 3186 files, 125M, built in 21.4 minutes >>>>>> ==> Installing therion dependency: wxmac >>>>>> ==> Downloading >>>>>> https://homebrew.bintray.com/bottles/wxmac-3.0.2.mavericks.bottl >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> Pouring wxmac-3.0.2.mavericks.bottle.9.tar.gz >>>>>> ? /usr/local/Cellar/wxmac/3.0.2: 777 files, 41M >>>>>> ==> Installing therion >>>>>> ==> Downloading http://therion.speleo.sk/downloads/therion-5.3.16.tar.gz >>>>>> ######################################################################## >>>>>> 100.0% >>>>>> ==> make config-macosx >>>>>> ==> make >>>>>> ==> make install >>>>>> ? /usr/local/Cellar/therion/5.3.16: 6 files, 4.4M, built in 50 seconds >>>>>> Roberts-MacBook-Pro:~ Rob$ xtherionxtherion >>>>>> -bash: xtherionxtherion: command not found >>>>>> Roberts-MacBook-Pro:~ Rob$ xtherion >>>>>> >>>>>> _____________________________________________________ >>>>>> >>>>>> A program named WISH opened and window named therion compiler. The >>>>>> Status bar at the bottom read ?User interface is not active. To activate >>>>>> it open and existing file or create a new one." >>>>>> When I try to open a file with either the Wish file|open or the folder >>>>>> button I am unable to open any files in the Demo data set - they are all >>>>>> grey and cannot be selected. >>>>>> >>>>>> I am a first time user. Previously used On Station and the Walls. I had >>>>>> data for 3 major caving areas in Walls totalling about 50 km of cave. I >>>>>> want to switch it all to Therion but if I can?t get the program to work >>>>>> then I?ll have to stick with Walls. >>>>>> >>>>>> Rob Countess >>>>>> -------------- next part -------------- >>>>>> An HTML attachment was scrubbed... >>>>>> URL: >>>>>> <http://mailman.speleo.sk/pipermail/therion/attachments/20150418/4f466a3f/attachment.htm> >>>>>> >>>>>> ------------------------------ >>>>>> >>>>>> _______________________________________________ >>>>>> Therion mailing list >>>>>> Therion at speleo.sk >>>>>> http://mailman.speleo.sk/mailman/listinfo/therion >>>>>> >>>>>> >>>>>> End of Therion Digest, Vol 112, Issue 4 >>>>>> *************************************** >>>>> -------------- next part -------------- >>>>> An HTML attachment was scrubbed... >>>>> URL: >>>>> <http://mailman.speleo.sk/pipermail/therion/attachments/20150418/dc6924bd/attachment.htm> >>>>> >>>>> ------------------------------ >>>>> >>>>> _______________________________________________ >>>>> Therion mailing list >>>>> Therion at speleo.sk >>>>> http://mailman.speleo.sk/mailman/listinfo/therion >>>>> >>>>> >>>>> End of Therion Digest, Vol 112, Issue 5 >>>>> *************************************** >>>> _______________________________________________ >>>> Therion mailing list >>>> Therion at speleo.sk >>>> http://mailman.speleo.sk/mailman/listinfo/therion >>> _______________________________________________ >>> Therion mailing list >>> Therion at speleo.sk >>> http://mailman.speleo.sk/mailman/listinfo/therion >> _______________________________________________ >> Therion mailing list >> Therion at speleo.sk >> http://mailman.speleo.sk/mailman/listinfo/therion > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion -- > ------------------------- > Xavier Pennec > Senior Research Scientist / Directeur de recherche > Asclepios project-team, INRIA Sophia-Antipolis > 2004 Route des Lucioles, BP93 > F-06902 Sophia-Antipolis Cedex, France > +33 4 92 38 76 64 > +33 6 78 35 16 90 > http://www-sop.inria.fr/asclepios/ > -------------------------------
