Hi Stacho, Thanks for the tip, this will greatly help me to improve my 3D !!!
Therion rocks ! Best, Phil > On 21 Feb 2017, at 14:18 PM, Stacho Mudrak via Therion <therion@speleo.sk> > wrote: > > Hi, this is a problem of 3D generation algorithm of therion... > > If a wall is relatively far away from centreline, height and dimensions > interpolation algorithm "averages too much". To overcome this, you need to > play with dimensions data for stations (putting some arbitrary large numbers > there - see example) or using "point dimensions -value [up down]" in 2D plan > somewhere near wall that needs to be affected. > > But these are not nice changes. We should modify 3D generation algorithm to > solve these situations correctly. > > S. > > On 15 February 2017 at 13:23, Philippe Vernant via Therion <therion@speleo.sk > <mailto:therion@speleo.sk>> wrote: > Hi guys, > > Here is the .th and .th2 file from a survey of a large chamber. What I don’t > understand is why the line survey is outside below the chamber. Any advice > on how to fix that ? > > Thanks, > Phil > > > > _______________________________________________ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion> > > > <test.th>_______________________________________________ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion