Sorry, it is near station a69 Martin Sluka > 19. 1. 2019 v
> 20:30, Andrey via Therion <therion@speleo.sk>: > > Hello Therion users, > > I am trying to make a 3D model for a small horizontal cave where only plan > had been drawn up. > > In case if I use splays for model generation it cuts through the wall > surfaces and looks not very nice. > If I use just walls with option "export model -wall-source maps" and bunch > of "point dimensions" model comes out without floor and cealing. > > Maybe someone can point out what am I doing wrong? > > Project files attached. > > > Thanks, > Andrey > > > > Вторник, 21 марта 2017, 5:53 UTC от Bruce Mutton via Therion > <therion@speleo.sk>: > > I had put my understandings (about ‘point dimensions’ and ‘point > passage-height’) in the wiki > > https://therion.speleo.sk/wiki/drawingchecklist#points > <https://therion.speleo.sk/wiki/drawingchecklist#points> > under the heading Passage Size, Fills and Speleothems > > and discussed an anomaly. Any corrections or comments welcome. > > > Bruce > > > > -----Original Message----- > From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Martin Sluka > via Therion > Sent: Tuesday, 21 March 2017 10:23 AM > To: List for Therion users <therion@speleo.sk <mailto:therion@speleo.sk>> > Cc: Martin Sluka <martinsl...@mac.com <mailto:martinsl...@mac.com>> > Subject: Re: [Therion] Troubles with the 3D generation > > > > > 20. 3. 2017 v 20:48, Benedikt Hallinger via Therion <therion@speleo.sk > > <x-msg://e.mail.ru/compose/?mailto=mailto%3ather...@speleo.sk>>: > > > > > > What is the different between "point dimensions" and "point passage-height"? > > > > > > If i understand the therion book correctly: > > > - dimensions is ONLY for the 3D-tube generation and invisible in rendered > > maps > > > - otherwise behaves as if "point passage-height [+<up> -<down>] would have > > been given. > > > > > > ...<clipped>... > > > A bit difficult to understand. I understand passage-height [+8 -3] From water > level to ceiling 8 m, depth of water 3 m. > > But what it means: "-<number> (the depth of the floor" or "[+<number> > -<number>] (the distance to ceiling and distance to floor)"? Has floor any > depth? Or it means the situation if the point „height“ is on edge of step or > pit? > > m.s. > > > _______________________________________________ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion> > > > -- > Kind regards, > Andrey > <Survey_01.zip>_______________________________________________ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion>
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
