Hi Bruce, I was using Therion 5.3.11, so will update and try again!
Many thanks, Ben From: Therion [mailto:[email protected]] On Behalf Of Bruce Mutton via Therion Sent: 03 November 2017 08:32 To: 'List for Therion users' Cc: Bruce Mutton Subject: Re: [Therion] DXF output Hi Ben As Markus says, impressive shots for a distoX. Very long if is really in metres. I compiled your example, after commenting out the th2 reference, and it compiles fine, I have attached the .3d, survey list and dxf outputs. They look to faithfully reproduce the data. If I open the dxf in DraftSight, it dimensions the lines exactly as in the .th file. Opening the .dxf files you supplied, I also get no image for o1.dxf, and the dimensions for lines in o1M.dxf are 100x shorter. So there is some problem with your output files that I cannot reproduce by compiling your o1.th and thconfig.dat files. Bruce Therion 5.4.1+4369eea Survex 1.2.32 From: Therion [mailto:[email protected]] On Behalf Of Markus Boldt via Therion Sent: Friday, 3 November 2017 11:26 AM To: 'List for Therion users' <[email protected]> Cc: Markus Boldt <[email protected]> Subject: Re: [Therion] DXF output Hi Ben, is it right - you give the lenght in meters? Then the distance from point to point is very long? A huge cave? There are Kilometers by some mesurements? Regards Markus Von: Therion [mailto:[email protected]] Im Auftrag von Ben Cooper via Therion Gesendet: Sonntag, 22. Oktober 2017 10:33 An: List for Therion users Cc: Ben Cooper Betreff: [Therion] DXF output I'm struggling to output a DXF format map and model from Therion. I've found that the map export does not load into two different DXF viewers, both giving no errors but showing nothing. The model output works, but is 100-times too small (ie the default unit appears to be cm rather than m). Can anyone provide any advice what I might be doing wrong? Many thanks, Ben
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
