And I have no Russian, but making assumptions based on Vladimir’s response…
(and apologising for using English) There are more subtle nuances that can be conveyed. Have a look at https://therion.speleo.sk/wiki/drawingchecklist?s[]=entrance#points <https://therion.speleo.sk/wiki/drawingchecklist?s%5b%5d=entrance#points> and scroll down to ‘Passage Ends’ point entrance. You can tell Therion to define a cave, and further, specifically define all the entrances that the ‘cave’ has. To expand on and change Vladimir’s example survey 01 -title “Some Cave name” -entrance 1 #defining the entrance here as part of survey definition tells Therion ‘it is a cave’ centerline cs lat-long fix 0 11:22:33.4 22:33:44.5 1234 # set the GPS coordinates and elevation of station 0 station 3 "Some other entrance name" entrance # Mark station 3 as another entrance of ‘Some Cave name’ cave, and display it’s name also … endcenterline endsurvey Have I got that right Vlad? Bruce From: Therion [mailto:[email protected]] On Behalf Of ???????? ???????? via Therion Sent: Sunday, 28 January 2018 7:18 AM To: List for Therion users <[email protected]> Cc: Владимир Георгиев <[email protected]> Subject: Re: [Therion] Экспорт в KML Hi My Russian is not that good, so I will reply in English. The kml model can export the entrances, if that is what you mean by "объектов". To get the name of the cave to display, you have to mark one or more stations as entrances. Something like this: centerline cs lat-long fix 0 11:22:33.4 22:33:44.5 1234 # set the GPS coordinates and elevation of station 0 station 0 "Some cave name" entrance # Mark station 0 as an entrance and set the name to be displayed. Not necessarily the same station as the one with the coords. ... Vladimir 2018-01-26 11:08 GMT+02:00 Кунгурская лаборатория-стационар via Therion <[email protected] <mailto:[email protected]> >: Здравствуйте. Подскажите, пожалуйста. Я пытаюсь экспортировать данные в KML-файл. Вот строка export model -fmt kml -output Kungur_Z.kml При просмотре kml-файла он не отображает названия объектов, а отображаются только линии. Подскажите, пожалуйста, как сделать так, чтобы названия объектов тоже отображались?
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
