Yes it does make a difference. Define a cave with the survey definition. Define
secondary entrances within centrelines.See the difference if you export caves
to a html file. For best effect you can do this for a multi cave project where
each cave has multiple entrances. I will post example outputs later.I suspect
the kml exports are not reporting the hierachy however.
Bruce
Sent from my Samsung device, hence the typo's
-------- Original message --------
From: Владимир Георгиев via Therion <[email protected]>
Date: 28/01/18 10:16 (GMT+12:00)
To: List for Therion users <[email protected]>
Cc: Владимир Георгиев <[email protected]>
Subject: Re: [Therion] Экспорт в KML
Bruce
Yes, that's right, you can define any number of entrances like this.
Although I admit I haven't used the "survey 01 -title “Some Cave name”
-entrance 1" syntax. So far I have always listed the entrances within the
surveys with several "station XX "Some other entrance name" entrance" lines.
Does it make a difference which syntax is used?
Vlad
On Sat, Jan 27, 2018 at 11:01 PM, Bruce Mutton via Therion <[email protected]>
wrote:
And I have no Russian, but making assumptions based on Vladimir’s response…(and
apologising for using English) There are more subtle nuances that can be
conveyed.Have a look at
https://therion.speleo.sk/wiki/drawingchecklist?s[]=entrance#points and scroll
down to ‘Passage Ends’ point entrance.You can tell Therion to define a cave,
and further, specifically define all the entrances that the ‘cave’ has. To
expand on and change Vladimir’s example survey 01 -title “Some Cave name”
-entrance 1 #defining the entrance here as part of survey definition tells
Therion ‘it is a cave’ centerline
cs lat-long
fix 0 11:22:33.4 22:33:44.5 1234 # set the GPS coordinates and elevation
of station 0
station 3 "Some other entrance name" entrance # Mark station 3 as
another entrance of ‘Some Cave name’ cave, and display it’s name also …
endcenterlineendsurvey
Have I got that right Vlad?Bruce From: Therion
[mailto:[email protected]] On Behalf Of ???????? ???????? via Therion
Sent: Sunday, 28 January 2018 7:18 AM
To: List for Therion users <[email protected]>
Cc: Владимир Георгиев <[email protected]>
Subject: Re: [Therion] Экспорт в KML Hi
My Russian is not that good, so I will reply in English.The kml model can
export the entrances, if that is what you mean by "объектов". To get the name
of the cave to display, you have to mark one or more stations as entrances.
Something like this:
centerline
cs lat-long
fix 0 11:22:33.4 22:33:44.5 1234 # set the GPS coordinates and elevation
of station 0
station 0 "Some cave name" entrance # Mark station 0 as an entrance and
set the name to be displayed. Not necessarily the same station as the one with
the coords.
...Vladimir 2018-01-26 11:08 GMT+02:00 Кунгурская лаборатория-стационар via
Therion <[email protected]>:Здравствуйте. Подскажите, пожалуйста. Я пытаюсь
экспортировать данные
в KML-файл. Вот строка
export model -fmt kml -output Kungur_Z.kml
При просмотре kml-файла он не отображает названия объектов, а
отображаются только линии.
Подскажите, пожалуйста, как сделать так, чтобы названия объектов тоже
отображались?
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
