Assuming that you've got another fix for the entrance then you should be able to get the height for the end station. Just look at the .3d file. That will give you the relative altitude at the end - just use that.
Henry -----Original Message----- From: Therion <[email protected]> On Behalf Of Adam Pyka via Therion Sent: 21 August 2018 10:42 To: [email protected] Cc: Adam Pyka Subject: [Therion] Fix station point using only 2D Hi all, How to 'fix' the survey station point (to morph the cave plan) having only 2D coordinates? Using the radiolocation we get (with quite good accuracy) the station point position which is about 150m beyond the estimated location we get from surveying. So now I wanted to use this position to make a correction to the main polygon. But the 'fix' command need a 3D coords so how should I do that (no, there is no point to measure the depth by radiolocation by some reasons). Thanks in an advice, Adam _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion Dell Corporation Limited is registered in England and Wales. Company Registration Number: 2081369 Registered address: Dell House, The Boulevard, Cain Road, Bracknell, Berkshire, RG12 1LF, UK. Company details for other Dell UK entities can be found on www.dell.co.uk. _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
