Add label altitude to that station and use it.
Odesláno z iPhonu 21. 8. 2018 v 11:46, Henry.Bennett--- via Therion <[email protected]>: > Assuming that you've got another fix for the entrance then you should be able > to get the height for the end station. Just look at the .3d file. That will > give you the relative altitude at the end - just use that. > > Henry > -----Original Message----- > From: Therion <[email protected]> On Behalf Of Adam Pyka via Therion > Sent: 21 August 2018 10:42 > To: [email protected] > Cc: Adam Pyka > Subject: [Therion] Fix station point using only 2D > > Hi all, > > How to 'fix' the survey station point (to morph the cave plan) having only 2D > coordinates? > > Using the radiolocation we get (with quite good accuracy) the station point > position which is about 150m beyond the estimated location we get from > surveying. So now I wanted to use this position to make a correction to the > main polygon. But the 'fix' command need a 3D coords so how should I do that > (no, there is no point to measure the depth by radiolocation by some reasons). > > Thanks in an advice, > Adam > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion > Dell Corporation Limited is registered in England and Wales. Company > Registration Number: 2081369 > Registered address: Dell House, The Boulevard, Cain Road, Bracknell, > Berkshire, RG12 1LF, UK. > Company details for other Dell UK entities can be found on www.dell.co.uk. > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
