Hi Phil Thanks. If I don't select any line, survey or map it also works on windows.
But does it work on your mac if you uncomment the first 5 statements "select line_.... " ? regards, Torsten > Philippe Vernant <[email protected]> hat am 5. Dezember 2019 um 10:24 > geschrieben: > > Hi Torsten, > > With this thconfig it works on mac. > > Best, > Phil > > > > > > > > > > > On 5 Dec 2019, at 08:51, Torsten Schnitter via Therion < > [email protected] mailto:[email protected] > wrote: > > > > > > Hi Alastair, hi Henry > > > > Thanks for your thoughts. > > Unfortunately it doesn't make any difference. > > > > Coordinate system lat-long is supported as you can read in the > > Therion book on page 14. > > Therefore I don't see a reason not to use it. Beside this it did > > work in the past (can't say on which Therion version it was). > > And with some of the select statements it still works with lat-long. > > > > But I also tried to use "cs UTM31N". > > This didn't make any difference. > > Same select statements are working or not... like with "cs > > lat-long". > > > > regards, > > Torsten > > > > > > > alastair gott < [email protected] > > mailto:[email protected] > hat am 4. Dezember 2019 um 19:35 > > geschrieben: > > > > > > Hi Torsten, > > > > > > Would it be cs UTM31N (I use UTM30N for spain so assume > > > that you're UTM31N for the lot) > > > > > > I find the UTM from geoplaner normally, not sure who > > > suggested it, but it's a good shout https://www.geoplaner.com/ > > > > > > Worth checking it out on Geoplaner, as its giving me the > > > UTM31N for your coordinates as being 390214 4960303 > > > > > > so i'd say you should try: > > > cs UTM31N > > > fix 9 0 390214 4960303 105 > > > > > > Marco gives a couple of the coordinate systems that you can > > > use > > > > > > http://marcocorvi.altervista.org/caving/tbe/m_02/m_02a.htm > > > > > > Marco doesn't give cs osgb:sk but I know it can be used (If > > > it's in the uk, because of course the British have to be different 🙁 ) > > > > > > > > > Regards, > > > Alastair Gott. > > > > > > [email protected] mailto:[email protected] , > > > M: 07931779380. > > > > > > > > > --------------------------------------------- > > > From: Therion <[email protected] > > > mailto:[email protected] > on behalf of [email protected] > > > mailto:[email protected] <[email protected] > > > mailto:[email protected] > > > > Sent: 04 December 2019 16:52 > > > To: [email protected] mailto:[email protected] > > > <[email protected] mailto:[email protected] > > > > Subject: Re: [Therion] kml export is not working > > > > > > Pretty sure you can’t use “CS lat-long”. I can get it to > > > work by stripping back to just > > > usinghttp://reseau_de_louysse_surveys_dry2_2012_09.th and swapping it for > > > “cs EPSG:32651” but then it puts it in completely the wrong place, > > > however it does populate the kml file correctly. > > > > > > Henry > > > > > > From: Therion < [email protected] > > > mailto:[email protected] > On Behalf Of Nick Bairstow > > > Sent: 03 December 2019 11:44 > > > To: List for Therion users > > > Subject: Re: [Therion] kml export is not working > > > > > > [EXTERNAL EMAIL] > > > > As far as I know you only need a geo reference within your > > > survey network. > > > >But you don't need to have a geo reference within your > > > selected data for output. > > > >Am I wrong with that? > > > You are correct, as long as you input the georeferenced > > > survey in the top level directory you can toggle any output on and off > > > with select in the survey structure. > > > > > > I had a quick look at your files and struggled a bit with the > > > structure, I will try and work it out tonight. > > > > > > From: Therion [ mailto:[email protected]] On Behalf > > > Of Torsten Schnitter via Therion > > > Sent: 03 December 2019 07:41 > > > To: List for Therion users < [email protected] > > > mailto:[email protected] > > > > Cc: Torsten Schnitter < [email protected] > > > mailto:[email protected] > > > > Subject: Re: [Therion] kml export is not working > > > > > > Hello > > > I have stripped down all the data to the minimum. > > > You can find all attached in the zip file. > > > As far as I know you only need a geo reference within your > > > survey network. > > > But you don't need to have a geo reference within your > > > selected data for output. > > > Am I wrong with that? > > > Anyhow. > > > If you have a look at the "thconfig-survey.thc" file you can > > > find some "DOES NOT WORK" and "DOES WORK" statements. > > > Beside this when not selecting anything it also does work > > > with the kml export. > > > What also does NOT work is selecting all lines (wihat should > > > be the same as selecting nothing). > > > When I do select the map "survey_southpassage_plan_m" it does > > > work. > > > This map does have the same lines like the first part in the > > > thconfig-survey.thc file which is not working. > > > May be there is something wrong in the select command? > > > regards, > > > Torsten > > > > > > > > > > Nick Bairstow < [email protected] > > > mailto:[email protected] > hat am 2. Dezember 2019 um 23:19 geschrieben: > > > > Just got there before me John. You are correct no > > > > coords but there is not much else either. I can edit the kml and insert > > > > coords name and icon and the file opens as expected but no > > > > centreline/splays or map outline in the case of model output. Also, if > > > > you try to compile Therion and ask for kml output and there are no > > > > coords in the .th then it fails with a warning. > > > > I think there is something else going on and we need to > > > > see all the data. > > > > > > > > From: Therion < [email protected] > > > > mailto:[email protected] > On Behalf Of John Stevens > > > > Sent: 02 December 2019 21:38 > > > > To: [email protected] mailto:[email protected] > > > > Subject: Re: [Therion] kml export is not working > > > > > > > > Looking at the kml file, I don't see the geo referenced > > > > points. By taking just part of the system, have you cut out a fixed > > > > point for the kml. This is a problem I have found when doing part of a > > > > system. > > > > > > > > > > > > > > > > From: Torsten Schnitter via Therion > > > > Sent: Monday, December 2, 2019 1:35 PM > > > > To: [email protected] mailto:[email protected] > > > > Cc: Torsten Schnitter > > > > Subject: [Therion] kml export is not working > > > > > > > > Hello > > > > I have some problems with exporting a kml file and I > > > > wonder what I'm doing wrong. > > > > I'm using Therion 5.4.4 (2019-05-01) on Windows 7. > > > > Aim is to just get the survey lines from a part of the > > > > cave system into a kml file. > > > > In the thconfig file I select several lines with the > > > > "select command". > > > > (I used to do this with double click on the data > > > > structure on the right side from the compiler window) > > > > Generating a pdf file with: > > > > export map -fmt pdf -proj plan -o > > > > _Output\Reseau_de_lOuysse_southpassage_2019.pdf -layout layout_plan > > > > is doing exactly what I want to have. > > > > The result is just the survey data from a part of the > > > > complete cave system. > > > > But exporting a kml file with the same selected lines > > > > fails: > > > > export model -fmt kml -o > > > > _Output\Reseau_de_lOuysse_southpassage_2019.kml > > > > This file does not have any survey data in it. > > > > Both files are attached. > > > > Does anybody have any idea what I'm doing wrong? > > > > regards, > > > > Torsten > > > > > > > > --------------------------------------------- > > > > _______________________________________________ > > > > Therion mailing list > > > > [email protected] mailto:[email protected] > > > > https://mailman.speleo.sk/listinfo/therion > > > > https://mailman.speleo.sk/listinfo/therion > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Therion mailing list > > > > [email protected] mailto:[email protected] > > > > https://mailman.speleo.sk/listinfo/therion > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Therion mailing list > > > [email protected] mailto:[email protected] > > > https://mailman.speleo.sk/listinfo/therion > > > > > > > > > > > > > > > > _______________________________________________ > > Therion mailing list > > [email protected] mailto:[email protected] > > https://mailman.speleo.sk/listinfo/therion > > > > > > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion >
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
