Hi Roger As Tarquin mentioned, it is quite easy, although it may take some work to convert an existing project. I only export one extended profile shape per compiler run, but it might be possible to export multiple profiles per compile - conceptually it should work, maybe there is some detail that complicates things. Full description on the wiki https://therion.speleo.sk/wiki/extend The second option that Tarquin describes is set out towards the bottom of that page. I have one master configuration file that I manually tweak depending on the output and extended profile I want. An alternative would be to have a thconfig for each extended profile (but I think that is harder to manage over the longer term-too much duplication).
Bruce -----Original Message----- From: Therion <[email protected]> On Behalf Of Roger Schuster Sent: Thursday, 17 June 2021 05:06 To: [email protected] Subject: [Therion] Two extended profiles for same survey Hello cavers, assume there are survey shots like this 0-1 1-2 1-3 1-4 (the numbers are the station names) forming a cross-shaped survey. I want to draw two extended profiles along the legs 0-1-2 (hiding stations 3 and 4) and 3-1-4 (hiding stations 0 and 2). This means the station names required for the "extend hide" directives are mutually exclusive. Is it possible to work around this problem? Thanks in advance! Regards, Roger _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
