Birthe, Given how carefully you have described things in the past and followed instructions my first thought is that my instructions are unclear or that there is something else wrong, not that you are making a mistake.
I am sorry if this is something that you have already looked at, but when finding these problems you always start with the smallest things. My first thought is to look at what you are typing into the address bar of the other computers to access the wiki? On the local computer 127.0.0.1 is just how the computer references things hosted locally and it will almost always be fine opening it at that address on the computer running Bob, on the other computers you will need to use what is listed as the wiki server address at the top of the Bob Settings tab, it should be something like '192.168.0.11:8080' Tony, As shown in the documentation, to configure the host you change values in ws-server, you do not need to set it in three places. Changing values in serverInfo will do nothing as it is generated each time Bob starts. As far as the host vs IP address distinction, I am sure there are many sources online that can explain that far more clearly than I could. You could start with the expressjs or Apache documentation, in my experience they are generally complete and at least marginally understandable. For opening other addresses automatically goes I would have to modify some parts of BobEXE, at the moment 127.0.0.1 is hardcoded because it hasn't come up and anyone doing more complicated things has been using the plugin version. The next version of BobEXE should support opening on different ip addresses based on the value of host. -- You received this message because you are subscribed to the Google Groups "TiddlyWiki" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/tiddlywiki/26371f37-3122-45ca-b8ae-8225460a874f%40googlegroups.com.
