Hi Matias I've made a few excursions simulating "groupies" in different ways I've used matchtags and CheckboxToggleTag to add or remove grouptags: tagname2 and/or tagname3 and I've added a fET which is used to render two lists one with tiddlers tagged with tagname1 and grouptags: tagname2 and tagname3 and a list with tiddlers tagged with tagname1 and not grouptags: tagname2 or tagname3. TaggglyTagging is still applied for all individual results. Every list is inside a nested slider.. To make quick proof of concept tests I've added formtiddlerplugin/ datatiddlerplugin to provide input of tagname1 (common to all) and grouptags: tagname2 and tagname3... (needs refresh script)
Don't know if its usefull at all, however it was fun to assemble... Link: : http://twmtc.tiddlyspot.com/#groupies Regards Mårtensson On 27 Jan., 02:55, twgrp <[email protected]> wrote: > Thank you so much Måns! Your coding taught me many valuable bits. > > I have reworked your code and put up the result > here;http://groupies.tiddlyspot.com/ > (username=password=groupies) > > (A smaller/simpler list-tool for "few item lists" is also there, i.e > lists that don't require grouping.) > > However, there is still one major problem and that is the last part > you mention above, suggesting MatchTags; I've experimented with that > and a zillion other ways, but I can't get it to work. The output from > matchtags does not seem to be in an appropriate format as input to a > fET. I've also tried with "fETs as parameter input to fET" and loads > of different combos. No cigar, as can be seen in the link above.. :-( > > I.e the problem is to, for fET parameter input, get all the tiddlers > that are tags to Group tiddlers? > > Thank you again! > > On Jan 26, 2:32 am, Måns <[email protected]> wrote: > > > > > Hi again> +"|>|>|<<tiddler [[fET&TT&NS##notCat]] with: [[category]]\>\> > > |f\n" > > > should have been "with: [[item]]" of course.. > > And the <<list filter tag expression needs MatchtagsPlugin > > (TiddlyTools) to work as intended.. > > > > A few minutes and I'll provide a testcase for you... > > > I've made a minimal testcase for you, based on your first > > example:http://twmtc.tiddlyspot.com/#fET%26TT%26NS > > > You'll find the plugins in the timeline... > > > Regards Måns Mårtensson > > > > On 26 Jan., 00:48, twgrp <[email protected]> wrote: > > > > > TagglyTagging is one of my all time favorite plugins, but it doesn't > > > > quite fulfill what I'm asking for... possibly due to a flaw; > > > > > <<tagglyTagging [[Tag1]]>> should (IMO), in "group view", only list > > > > tiddlers tagged "Tag1". That is "what is asked for" when expressing > > > > that macro call, as far as I can tell. But as it is now it also lists > > > > *all other* tags that happen to appear in tiddlers that are tagged > > > > Tag1. IMO this results in potentially long lists and information not > > > > asked for. > > > > > Mike, I appreciate the suggestion though as I had, strangely enough, > > > > not considered TagglyTagging. I'm doing some experimenting and will > > > > get back. > > > > Thank you. > > > > > On Jan 25, 2:41 am, Mike <[email protected]> wrote: > > > > > > sounds like a job for TagglyTaggingPlugin . . . > > > > > >http://mptw.tiddlyspot.com/#TagglyTagging%20TagglyTaggingPlugin > > > > > > Looks like it will do what you are looking fo out of the box (unless I > > > > > missed something) > > > > > > Good Luck, > > > > > > Mike > > > > > > On Jan 24, 7:30 pm, twgrp <[email protected]> wrote: > > > > > > > I give up. Three days of mutilating scripts and forEachTiddlers etc, > > > > > > not to mention digging in the archives... but I just can't crack > > > > > > this: > > > > > > > I wish to create a list from tagged tiddlers like this (the format > > > > > > is > > > > > > Tiddler:Tags) > > > > > > > ItemB:Category > > > > > > - ItemM: ItemB > > > > > > - ItemN:ItemB > > > > > > ItemC:Category > > > > > > - ItemB:ItemC (+tagged Category as seen above) > > > > > > - ItemN:ItemC (+tagged ItemA as seen above) > > > > > > - ItemQ:ItemC > > > > > > ItemA (not tagged Category therefore ending up after all categories > > > > > > are listed) > > > > > > ItemP > > > > > > > Alternatively, more real example; > > > > > > > China:Category > > > > > > - Plate:China > > > > > > - Saucer:China > > > > > > KitchenStuff:Category > > > > > > - China:KitchenStuff (+Category) > > > > > > - Plate:KitchenStuff (+China) > > > > > > - Tray:KitchenStuff > > > > > > ArmChair > > > > > > Table > > > > > > > In short, there are three types of tags > > > > > > 1) Item (all are tagged with this, not shown in list above) > > > > > > 2) Category > > > > > > 3) names of 'Category tiddlers' > > > > > > > Tagging items with "non-Category-tiddler-names" (e.g Plate or Table) > > > > > > affects nothing. However, items tagged with (2) or (3) appear ONLY > > > > > > as > > > > > > a Category and/or as a sub-item, i.e not as a separate item also. > > > > > > The > > > > > > idea is to shorten the list by categorizing things. > > > > > > > Here untagged items come after categories, but it's ok if untagged > > > > > > items and categories are ordered together, i.e ItemA/ArmChair before > > > > > > ItemB/China above. > > > > > > > For slick "sub-levelling" I intend to use ELS > > > > > > NestedSlidersPlugin[1]. > > > > > > This means that whatever is put between +++ and === becomes a > > > > > > sublevel. > > > > > > > I really hope someone can help out with this. It is a crucial part > > > > > > of > > > > > > a bigger project. > > > > > > Thank you. > > > > > > > [1]http://www.tiddlytools.com/#NestedSlidersPlugin -- You received this message because you are subscribed to the Google Groups "TiddlyWiki" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/tiddlywiki?hl=en.
