There are some updates, mostly to the code side of things but now you can:
* Set the width and height css units separately * Change how bars are labeled, but there aren't many options yet. * Use both normal (upright) and inverted (hanging) bar charts as well as charts that start on the right or on the left * Now something is shown regardless of what you have the height set to, but it may not be correct if you have a small height and are using the stacked mode. * The chart now uses the full height and width that you give with the appropriate dimensions determined automatically for both width and height * Maybe something else I forgot The creator tool is updated, so you can play with that to see how everything works. I would like to make some sort of annotations for the charts this makes, but I don't have any good ideas about how to do that so I may take a quick look at this again tomorrow and unless I have some specific ideas move the changes to the normal plugin library and be done with this for now. Josiah, Good point about left and right, I am not sure why I didn't notice that. As far as the radio buttons go I am not sure what you are referring to, they have been working as expected on both firefox and safari. The experimental version is still here http://ooktech.com/jed/ExampleWikis/BarChart/ -- You received this message because you are subscribed to the Google Groups "TiddlyWiki" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/tiddlywiki. To view this discussion on the web visit https://groups.google.com/d/msgid/tiddlywiki/76828633-6dcb-4606-a362-73e75fd5fee7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
