@a14stoner
One other thing I noticed is that you are still using HDD. The osm2pgsql manual
clearly recommends (NVMe) SSDs due to the need for fast random access during
some stages of the processing:
https://osm2pgsql.org/doc/manual.html#disk
Even if you can swap out the disks for only a single SATA SSD drive, it might
help the processing speed. However, NVMe PCIe adaptors and a relatively small
1TB NVMe drive should cost you little, and be easy to install in older hardware.
--
Reply to this email directly or view it on GitHub:
https://github.com/osm2pgsql-dev/osm2pgsql/issues/2266#issuecomment-2431253778
You are receiving this because you are subscribed to this thread.
Message ID: <osm2pgsql-dev/osm2pgsql/issues/2266/[email protected]>
_______________________________________________
Tile-serving mailing list
[email protected]
https://lists.openstreetmap.org/listinfo/tile-serving
