-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooke Clarke Sent: Friday, December 09, 2005 18:29 To: Discussion of precise time and frequency measurement Subject: [time-nuts] FTS4060 was Dead, Now Working?
Hi: When my FTS4060 s/n 1013 was delivered it was shipped outside the carton with metal banding holding it on top of the other units in their boxes. January of this year I got the Operation LED to turn on, but the frequency was drifting about where you would expect a good crystal source to be. So I took this unit completely apart as part of an effort to make a manual. A few days ago I put it back together and low and behold it locked up and has been locked for a couple of days now. Today I soldered jumpers across the power switch in the SR620 which had gone bad and started comparing the FTS4060 1 MHz zero crossings with the M12T+ 1 PPS and after about an hour the rate seems to be close to a straight line at 6 ps/second. This with the C Field set at 500. Maybe it's now working? Have Fun, Brooke Clarke, N6GCE -- w/Java http://www.PRC68.com w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml http://www.precisionclock.com _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
