Usually lacquer thinner will take it right off, but it depends on the conformal coating. Nothing will take the urethane variety off.
-Chuck Harris Christopher Hoover wrote: > fellow time-nuts, > > there is a hard, clear conformal coating on one of the buffer/divider > boards in my FTS 4050/S24. i wish to make some changes to the board to > get back the 10MHz output that was removed with option /S24. > > to do so, first i need to get this coating off in a few areas. > > anyone know what this coating might be and/or how to remove it? > > i've tried isopropyl alchocol, acetone, and mg 435 (aka 2-propanone), > but none seem to work very well. i was too chicken to leave any of them > on the board for very long. > > -ch > > _______________________________________________ > time-nuts mailing list > [email protected] > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
