Woohoo! I was able to "undo" option /S24 on my FTS 4050. I now have 1 MHz out, 5 MHz out, 10 MHz out, 1 PPS out, and 1 PPS sync and sync enable. Before I only had two 1 MHz outputs. The 5 MHz out and 1 PPS outputs were as simple as coax and connectors. Fortunately I had some SMA to BNC cable assemblies that were of the perfect length. The 1 PPS sync requires some coax, connectors, and a push button; it is nearly trivial. The 10MHz output required some work on the divider/multiplier assembly. The Mini-circuts doubler is already on the board. Restoring the 10 MHz outputs involves removing a jumper, replacing several L's and C's according to the schematic/parts list, and then doing the selection of a few C's for tuning. I believe there's a /S24 option to the FTS 4060 as well. It probably isn't too hard to "undo" /S24 on the FTS 4060, too. -ch _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
