Hal, The M12M-T has a Self-Survey function that normally gets you down to a meter or so. Unfortunately this function takes data for 10,000 fixes so it takes about 2.5 hours to complete. This function was created by Motorola back when SA was on and you really needed a long sample to get a decent position. Nowadays I normally just let WinOncore12 or SynTaC take data for 15-20 minutes, and the average positions on multiple runs are always within a couple of meters of each other. You will see several ns of 1PPS offset due to slight changes in the Position Hold Position, but this is easily removed using the 1PPS offset commands if you are trying to match to another receiver. In the big scheme of things these offsets are pretty much below the noise level.
Randy Warner Senior Applications Engineer Synergy Systems, LLC [EMAIL PROTECTED] ________________________________________________________________________ _________________________________________ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hal Murray Sent: Wednesday, January 03, 2007 10:31 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Positional accuracy of the M12+T > Position hold mode allows them to solve N(sat) equations with one > unknown instead of N(sat) equations with four unknowns. That assumes you have good data for your location. How good is the find-my-location code? What happens to the timing results if the assumed location is off? -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
