that switch setting and that the inside switch is set to the freq of the outside frequency. I am at work today but will check. also the internal battery is 9v and a jumper is in place for operation. I added a 4volt zenner to allow operation from my battery system (12v solar) to be plugged in the back connector instead of the 9v.
if you haven't found the front panel yet , there is a small hole in the bottom right of the front, use a pointed hook to lift the panel and find all the settings and the internal and external switch. took me a week to figure that one out !! tom w0kgw _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
