Hi Didier, Good to hear from you. Sounds like you did fine considering how bad condx were that night.
I will send out an email on the time and frequency. I think it will be Thursday night this week, but not sure yet. Thanks for participating and have a good weekend 73 Connie K5CM -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Didier Juges Sent: Saturday, May 26, 2007 8:11 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] FMT Well, I was too late sending my results, but I did manage to listen to the signals this past Wednesday. I did not have time to prepare anything but listening by ear on the FT-1000 and using the HP-3586A as a beat generator (free running off it's internal Ovenair precision OCXO), I managed to get within 0.4 Hz on 40 m and 0.2 Hz on 80m (good signals). I was off by 1.5 Hz on 20m, where the signal was very weak with QSB, and I did not hear anything on 17m. Thanks Connie, I will try to be better prepared next week (hooked to GPS and using Spectrum Lab). Didier KO4BB _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
