Prologix.exe should work in Vista, if you can get past the inevitable nagging. I'd like to hear if otherwise. You don't need Hyperterm for most things if you use prologix.exe.
For re-flashing the firmware, though, you will need a real terminal program. Prologix.exe will communicate with the board behind your back and cause problems with the boot loader. -- john, KE5FX > > Good catch! I didn't realize Microsoft removed HyperTerminal from Vista. > > You could use TeraTerm Pro instead - > http://hp.vector.co.jp/authors/VA002416/teraterm.html > > Configure as follows: > > Open "Setup" | "Terminal" dialog, check "Local Echo" and set Transmit to > "CR+LF" > Then open "Setup" | "Serial Port" and pick the port you want to use. > > Rest of the update instructions remain the same. > > By default, TeraTerm Pro shows only COM1-4. If your USB serial port is > higher than COM4, edit TERATERM.INI and set MaxComPort to a higher value. > For example: > > MaxComPort=16 > > Regards, > Abdul > _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
