Hi Rex: I can figure it out now. Thanks very much,
Have Fun, Brooke Clarke http://www.PRC68.com http://www.precisionclock.com Rex wrote: > On Sat, 09 Jun 2007 09:09:56 -0700, Brooke Clarke <[EMAIL PROTECTED]> > wrote: > > >>Hi Rex: >> >>Yes, although I was hoping for a precision oscillator. There are crystals at >>1, 10, 50 and 100 MHz each with a trimmer cap. >>20 Volts negative ground for power and NPN transistors. So far I haven't >>figured out the ground or the interconnection of all the solder posts. Maybe >>some type of grounding on the outputs. > > > Brooke, > > I copied the schematic page from my microfische as best I can with the > tools available here. Not great images but hopefully good enough for you > to work out connections. Let me know if you have questions after > looking. I could take another look at the docs. > > Posted here: > http://www.xertech.net/pub/wiltron/schem_L.gif > http://www.xertech.net/pub/wiltron/schem_R.gif > > > _______________________________________________ > time-nuts mailing list > [email protected] > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
