Hi Dan: It may just be a bad connection. You might un plug and mate each connector a few times including the boards, ribbon cables and if the LCD glass unplugs do it. I've found in 99% of the cases where older equipment no longer works the problem is a bad connection. More on that at: http://www.prc68.com/I/HaT.shtml
and Austron stuff at: http://www.prc68.com/I/A2100F.shtml Have Fun, Brooke Clarke http://www.PRC68.com http://www.precisionclock.com Dan Durgin wrote: > I have an Austron 2100F Loran-C clock receiver which works perfectly, but > the lcd readout is dead or washed out. Any ideas on a replacement unit? The > backlight still works fine. By the way, I recently bought on ebay and got > working after some difficulty, an HP-113AR. Thanks to some folks here at > time-nuts, I was able to verify replacement part numbers, for some missing > parts. Thanks much. > Daniel Durgin > Ocean View, Hawaii > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.476 / Virus Database: 269.9.10/875 - Release Date: 6/27/2007 > 9:08 PM _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
