); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY Dear All,
I'm looking for information (e.g. a manual) or people who have experience with the HP85814A Plug-in. It is a plug in for the HP8660x main-frame. It replaces both the modulation module and the RF-module. The display shows the M and N numbers of the PLL division in binary format. The name of the module: Programmable frequency reference. The module has no accessible RF-output on the front. The only reference I found was in an old HP-Journal: www.hpl.hp.com/hpjournal/pdfs/IssuePDFs/1972-02.pdf Here it is used as a part of an automatic spectrum-analyzer system (working up till 18 GHz). The article only describes the general system setup, unfortunately not much detailed information on the module itself. Searching the Agilent website didn't return any usefull information. Any information is welcome! Thank you, 73 Jeroen PE1RGE -- Ing. Jeroen Bastemeijer Delft University of Technology Department of Electrical Engineering Electronic Instrumentation Laboratory Mekelweg 4, Room 13.090 2628 CD Delft The Netherlands Phone: +31.15.27.86542 Fax: +31.15.27.85755 E-mail: [EMAIL PROTECTED] GPS: Lat N52.00002 Lon E4.37157 Alt 46.2m _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
