> Plans are to transmit two 10 minute test periods, and a third if the > transmitters aren't melting by that point.
> Our goal is to transmit a signal known in frequency to parts in 10e-12 > (i.e., less than 0.0001 Hz error at 10 MHz) and stable to a similar > level during the course of the transmission. Frequencies will be > measured at the transmitter site with a system capable of microHertz > resolution referenced to a GPS disciplined oscillator, and will also > be monitored by another station in groundwave range that can measure > the frequencies with similar accuracy. Suppose I have a pile of good lab gear, and it gets N seconds of signal. How accurately can it measure the frequency? -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
