In a message dated 9/28/2007 14:13:34 Pacific Daylight Time, [EMAIL PROTECTED] writes:
>I am interested about this OEM PCB with external OCXO, due to the reason I have 3 HP OCXO >10811 and the other one, so please put me on the waiting list. Hi Ernie, no problem, 10811's are great. Will let you know. Our EFC output is 0V to 5V, so you can set the 10811 with the mechanical adjust to have a nominal voltage of 2.5V, I did that to one of my 10811's, works perfectly. Fury supports both positive and negative EFC slope via software command, so anything that can use 0V to 5V and has 10MHz output should work. If an OCXO needs -5V to 5V (some Wenzels need that for example) then a simple external Opamp circuit can shift the range from unipolar to bipolar. bye, Said ************************************** See what's new at http://www.aol.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
