); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY HPGL yes, HPGL/2 no.
On 10/21/07, Max Robinson <[EMAIL PROTECTED]> wrote: > > I could be wrong but it seems to me that the 7475 did support HPGL in > ASCII > form. I used to use the older versions of AutoCAD which had built in > drivers for it. I've written a graphics program that outputs in HPGL. I > use Corel Photo Paint 8 to convert the files to almost any other graphics > format. > > Regards. > > Max. K 4 O D S. > > Email: [EMAIL PROTECTED] > > Transistor site http://www.funwithtransistors.net > Vacuum tube site: http://www.funwithtubes.net > Music site: http://www.maxsmusicplace.com > > To subscribe to the fun with tubes group send an email to, > [EMAIL PROTECTED] > > ----- Original Message ----- > From: "Didier Juges" <[EMAIL PROTECTED]> > To: "'Discussion of precise time and frequency measurement'" > <[email protected]> > Sent: Saturday, October 20, 2007 10:01 PM > Subject: Re: [time-nuts] OT: Need HP 7475A Drivers for XP or Linux > > > > Well, it you are trying to use it as a Windows device, that's something > > else. > > > > I don't think it can hurt to try HPGL. I am not sure what language that > > plotter used, but I am sure it was not HPGL, it used a simple set of > ASCII > > commands. It may have actually supported more than one language, but I > > doubt > > it. It was a long time ago :-) A manual might help. > > > > I doubt that the 7550 would use the same commands, it is an inkjet > > printer. > > If it has its own driver, that's probably because it does not support > HPGL > > or any other type of standard language. > > > > Sorry I can't help... > > > > Didier KO4BB > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] On Behalf Of Joseph Gray > >> Sent: Saturday, October 20, 2007 9:42 PM > >> To: Discussion of precise time and frequency measurement > >> Subject: Re: [time-nuts] OT: Need HP 7475A Drivers for XP or Linux > >> > >> I'm looking at the "Add Printer" dialog in WinXP right now. I > >> see "HP-GL/2 Plotter" and "HP 7550 Plus" listed. Shouldn't > >> one of those work? > >> > >> > >> ----- Original Message ----- > >> From: "Didier Juges" <[EMAIL PROTECTED]> > >> To: "'Discussion of precise time and frequency measurement'" > >> <[email protected]> > >> Sent: Saturday, October 20, 2007 8:32 PM > >> Subject: Re: [time-nuts] OT: Need HP 7475A Drivers for XP or Linux > >> > >> > >> >I did write some QuickBasic code for that plotter a number > >> of years ago. > >> > I used it to plot data from an HP 8566 that was subjected > >> to calculations > >> > that were more easily done in a PC than on the instrument. > >> > I also plotted data from an HP network analyzer, forgot which. > >> > If I recall, the commands are simple and the plotter is > >> easy to control > >> > (if > >> > you write your own code). > >> > I am not aware of any drivers you can use with shrink-wrap > >> software, but I > >> > would be surprised if someone has not done that under Linux. > >> > > >> > Didier KO4BB > >> > > >> >> -----Original Message----- > >> >> From: [EMAIL PROTECTED] > >> >> [mailto:[EMAIL PROTECTED] On Behalf Of Eric Fort > >> >> Sent: Saturday, October 20, 2007 8:57 PM > >> >> To: Discussion of precise time and frequency measurement > >> >> Subject: [time-nuts] OT: Need HP 7475A Drivers for XP or Linux > >> >> > >> >> There seems to be a wealth of knowlege here about keeping > >> >> older HP hardware running. Would anyone in this group have > >> >> experience using a 7475A plotter under XP or Linux to plot > >> >> test data or drawings. I'd like to get mine running again. > >> >> > >> >> Thanks, > >> >> > >> >> Eric > >> >> _______________________________________________ > >> >> time-nuts mailing list -- [email protected] To unsubscribe, > >> >> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> >> and follow the instructions there. > >> > > >> > > >> > _______________________________________________ > >> > time-nuts mailing list -- [email protected] > >> > To unsubscribe, go to > >> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> > and follow the instructions there. > >> > > >> > > >> > >> > >> _______________________________________________ > >> time-nuts mailing list -- [email protected] > >> To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> and follow the instructions there. > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.5.488 / Virus Database: 269.15.5/1084 - Release Date: > > 10/21/2007 3:09 PM > > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
