); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY Tom C,
As Bruce notes below, the LM338K is a 5 amp job with a 35v max DC input rating. Just allow adequate heatsinking otherwise the 338 will "foldback" due to over temperature. There's plenty of on-line help to select the resistor values for 24 volts o/p. If you're really keen (?), add a few diodes with the mandatory bypass caps and you're cooking ! Cheers, Kit >>snip Hej Magnus Since the output voltage range of a 7824 is 23 - 25V that arrangement wont work very well unless you match all 7824's to within say 50mv or so of the same output voltage and mount them on a common heat sink. If you want to use a 3 terminal regulator why not just use an LM338 (plus a couple of resistors to set the output voltage) or similar device? Bruce _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
