); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY In a message dated 10/30/2007 11:17:58 Pacific Daylight Time, [EMAIL PROTECTED] writes:
>Ok, this one is somewhat difficult. The HP oscillators have +12 and >+24 V supplies. MTI requires +5 to +15 and Crystek needs +12. So we >have a wide range here. What does the Fury supply? >A compromise has to be made. >On the Fury, Is there a connector that breaks out the pinout of the >OCXO or would the individual power pins need to be directly soldered to? >I would rather avoid direct soldering. I want to have the Fury is a >"untouched" state, if possible. Hi George, Fury supplies 10.5V nominally at the OCXO's pins next to the SMA connectors. 220mA max is expected. Most 12V OCXO's will work well at 10.5V. Unfortunately this means soldering to the power pins of the OCXO footprint directly, unless you can clamp a wire into the holes. bye, Said ************************************** See what's new at http://www.aol.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
