); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY Hello:
My different types of equipment (scope, freq cntr, spec analyzer, etc) never seem to be right on the money, so I decided to run them all off a commnon exact 10MHz rubidium source. I got an FE-5680A (was on a chopped off ckt board-whcih is apparently part of some motorola system pcb)..I hooked pin 1 to +15V & pins 2 to gns ...but nothing came out any of the other pins?!?? Where is the output? Do I need another cxonnection? I read you might need to apply +5v, but don't want to try unless I know what I'm doing. How do you determine what option your unit has? It looks like about 60 options are possible!! By the way, with my spec analyzer probe nearby I am sniffing the 6.834xx GHz signal-so the Rb is in there doing its thing. As a second note, as I read around here, it seems (to my understanding) that the Rb osc is not exact--that in fact it needs calibrated!! Well, I dont't want to cal it --I bought this "atomic clock" to let me cal all of my various xtal oscilators. How on earth shall I cal this thing? If I don't cal, how far off is it? Can i count on 9 digits of accuracy with "no cal" a thanks for your hints & direction....I think I'll enjoy this group & hope to make some contibutions once I get going. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
