); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY Dear All,
I'm looking for information on the Trimble 23198-61 GPS-Receiver. This is a metal case with two DB-9 connectors, a SMB antenna connection and a three pole power plug. If you want to see a picture, look on the webpage of Brooke (http://www.prc68.com/I/Trimpack.shtml#SV6) I send an E-mail to the support desk of Trimble, but I don't expect any response from them :-( I have the receiver running with TSIP (using TSIPmonitor from Trimble), the 1 PPS is coming out happily :-) Funny thing, they are not Year 2000 and something compatible... when looking at the date it says '1988' for the year, which corresponds to a roll-over of the counter after 1024. Doing the math, and adding the 1024 to the GPS-date gives the proper answer. My question: I'm looking for more information and software utillities. Is there anyone with docs (PDF?) and/or the flash-utillities of this receiver? The firmware version is 4.06. (The 5.12 version from Trimble seems to work, but not for the full 100% for these receivers). Thank you, best regards, 73 Jeroen PE1RGE -- Ing. Jeroen Bastemeijer Delft University of Technology Department of Electrical Engineering Electronic Instrumentation Laboratory Mekelweg 4, Room 13.090 2628 CD Delft The Netherlands Phone: +31.15.27.86542 Fax: +31.15.27.85755 E-mail: [EMAIL PROTECTED] GPS: Lat N52.00002 Lon E4.37157 Alt 46.2m _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
