I am looking for connector info (pin assignment and mating connector ID) for a Trimble Thunderbolt receiver module. This is the OEM module (probably telcom original customer) with just the receiver board contained in the enclosure( no 24 volt DC-to-DC converter). Presumably the small six (6) pin connector accepts +5, +12 and -12 volts DC. I need to know the pin assignments of this connector and the ID of the mating connector, if possible. The connector on the module is a "shrouded header" with a slot (in the shroud) for polarization. The mating connector will have to be a 6 pin, female (socket) configuration. The plastic housing would be approximately 3/32" wide by 0.6" long. The size is similar to that for some of the connectors used for audio patch connections on many PC soundcards. The header pins are round and smaller than the standard 0.025 square header posts. Any info would be greatly appreciated. 73 Jeff Walker W3JW
_______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.