Hi, Thanks for uploading the Fluke PM-6681/Pendulum CNT-81 service manual to http://www.ko4bb.com/cgi-bin/search.pl
Looks like calibration is relatively simple and no special software is required unless the instrument has lost its calibration information. If this occurs then an interpolation calibration is necessary which involves a "interpolator calibration program" which was included with the service manual on a 3 1/2" disk. The interpolator only needs calibration if the counter has lost its calibration information. It would be nice to find a copy of this program. Any suggestions from the group? Jeff ----- Original Message ----- From: "S. Nestra" <[EMAIL PROTECTED]> To: "Discussion of precise time and frequency measurement" <[email protected]> Sent: Friday, November 30, 2007 5:26 PM Subject: [time-nuts] PM6681 Manual > For those interested, I have uploaded the service manual for the Fluke > PM-6681/Pendulum CNT-81 to the k04bb website. > Too bad you can't calibrate these beasts yourself, special software is > needed. > > Regards, > > Stijn Nestra > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
